Product Data Sheet Show all documents
SikaBond® PVA Wood Adhesive+

SikaBond® PVA Wood Adhesive+

D3 Cross-Linked PVA Based Wood Adhesive

SikaBond® PVA Wood Adhesive+ can be used internally and externally and provides a high strength, impact resistance bond that is usually stronger than the wood itself. It dries clear and cures fast, with initial set time of 10 minutes. Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use.

  • Fast bond strength development.
  • High water resistance - D3 Classification.
  • Will not stain timber.
  • Dries clear.
  • Waterbased for easy clean up.
  • Suitable for radio frequency cure.
Seek a stockist Find Similar Products
Product Data Sheet Show all documents

Usage

  • Woodworking and joinery.
  • Furniture assembly.
  • Household DIY use.
  • As a weatherproof/ creep resistant wood adhesive.
  • Interior and exterior use.
 

Advantages

  • Fast bond strength development.
  • High water resistance - D3 Classification.
  • Will not stain timber.
  • Dries clear.
  • Waterbased for easy clean up.
  • Suitable for radio frequency cure.

Packaging

Bottles: 250 mL, 500 mL & 1 L
Jerry cans: 5 L & 25 L

Colour

White, dries clear

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Conforms to EN204 and EN205 class D3.
EN14256 Resistance to static loads.
Product Information

Chemical Base

Waterbased polymer

Shelf Life

12 months from date of manufacture when stored according to manufacturer’s instructions.

Storage Conditions

Store in cool, dry conditions between +5 °C to +25 °C. Protect from frost. Ensure containers are well sealed and out of direct sunlight. During storage, slight separation may occur (thin layer above thicker layer). This is an aesthetic rather than technical problem. In this case, mix well before applying.

Density

1.0 – 1.2 g/cm3

pH-Value

2.0 - 4.0

Solid Content

45 – 50 %

Viscosity

7000 – 15000 cP @23 °C
Technical Information

Thermal Resistance

Stable (4 week @ 50 °C)

Application

Application steps

SUBSTRATE PREPARATION

  • All surfaces must be clean, dry and free from grease.

Documents