Selecting an appropriate tile adhesive and tile grout is an important consideration when installing wall and floor tiles. Sika offers a range of wall and floor tile adhesives and grouting solutions that are suitable for use in bathrooms and wet rooms.
The range includes options such as a ceramic tile adhesive, a rapid‑setting tile adhesive designed to support efficient tile installation, and a wall and floor tile grout developed for a consistent, clean finish. Sika provides C2 TE and C2 FTE classified tile adhesives, which are formulated to offer good adhesion properties, reduced slip characteristics and extended open times to support tile application on walls and floors.
The Sika tiling range is designed to support professional and DIY installation requirements across a variety of tiling projects.
Advantages of Sika's Tile Adhesive & Grout Products
- Suitable for both wall tile adhesive and floor tile adhesive applications
- Developed for DIY tiling projects and professional tile installations
- Suitable for ceramic tiles, earthenware tiles, and selected natural or artificial stone tiles
- Can be used on internal walls and floors, including indoor heated floors
- Available in standard‑setting and rapid‑setting tile adhesive formulations
- C2 TE classified tile adhesive option formulated to provide good adhesion properties, reduced slip and an extended open time
- C2 FTE classified tile adhesive option formulated to support faster setting times and shorter installation timelines
- No vertical slip characteristics designed to support tile positioning during wall installation
- Extended open time formulated to allow flexibility when positioning and adjusting tiles
- Rapid‑setting formulations designed to allow earlier grouting and light foot traffic, subject to site conditions
- Dust‑reduced formulations designed to support a cleaner working environment during mixing and application
- White tile adhesive option available for applications where a light‑coloured adhesive is preferred
- Wall tile grout and floor tile grout solutions developed to support a consistent and durable finish between tiles
Discover Our Tile Adhesive & Grout Products
Sika products are available for purchase through our nationwide network of distribution partners.
Comparison of Sika's Tile Adhesives
SikaCeram®-204 Medium White
- Cement-based tile adhesive for walls and floors
- White colour
- Classified as a C2 TE tile adhesive
- Improved bond strength, extended open time and no vertical slip
- Suitable for medium-sized ceramic tiles, earthenware tiles and certain natural and artificial stone tiles
SikaCeram®-204 Rapid
- Rapid setting cement-based tile adhesive for walls and floors
- Grey colour
- Classified as a C2 FTE tile adhesive
- Fast setting, improved bond strength, extended open time and no vertical slip
- Suitable for medium-sized ceramic tiles, earthenware tiles, terracotta tiles and certain natural stone tiles
Tile Adhesive Consumption Calculator
Don't know how much tile adhesive you need? Use our consumption calculator tool to calculate estimated quantities of the SikaCeram® tile adhesive range required to complete your project.
Please note: Calculation of coverage is by average and might vary depending on job site conditions. Please contact your Sika sales representative for a specific recommendation.
Download Library
FAQ
The recommended tile adhesives for bathroom tiling are cement-based polymer modified tile adhesives that are flexible, water-resistant and classified at minimum as C2TE S1.
Sika offers SikaCeram®-204 Medium White, a cement-based tile adhesive with improved adhesion for ceramic tiles, or SikaCeram®-204 Rapid, a rapid setting tile adhesive.
A 20kg bag of tile adhesive typically covers an area of around 3 to 5 m². Uneven or porous surfaces require more adhesive to achieve a level and secure bond. A well-prepared, flat surface allows for more efficient coverage. Always check the Product Data Sheet for the most accurate coverage rates and recommended application methods for your project.
To calculate tile adhesive coverage for your project you can use the Sika Tile Adhesive Consumption Calculator found here.
Tile adhesive should be applied to a clean, dry and stable substrate using a notched trowel. After preparing the surface and ensuring any required priming or waterproofing is complete, spread the adhesive evenly across the area, holding the trowel at a consistent angle to create uniform ridges. Press each tile firmly into the adhesive, adjusting as required to achieve the correct alignment. Always follow the open time and working time stated on the Product Data Sheet and take care to avoid applying more adhesive than can be tiled over within that timeframe.
For a visual example, watch the video here.
To apply tile grout, first ensure that the tiles are fully set. Mix the grout according to the instructions on the Product Data Sheet, then use a rubber grout float to press it firmly into the tile joints at a 45° angle. Remove excess grout from the tile surface with the float, then wipe tiles with a damp sponge to clean residue. Once the grout has cured use a sanitary silicone sealant to seal any corner joints.
C2 TE tile adhesive is for projects where high bonding strength is required. C2 TE tile adhesive is classified under European standard EN 12004 as having enhanced bonding strength (C2), reduced vertical slip (T) and an extended open time (E).
SikaCeram®-204 Medium White is classified C2 TE tile adhesive.
C2 FTE tile adhesive is for projects where advanced adhesion and rapid set times are required. C2 FTE tile adhesive is classified under European standard EN 12004 as having superior bonding strength (C2), reduced slip (T), fast setting (F) and an extended open time (E).
SikaCeram®-204 Rapid is classified as C2 FTE tile adhesive.
