Facade

• Reduction of capillary water absorption.
• Reduces efflorescence.
• Reduces dirt penetration into the pores.
• Improves thermal insulation.
• Can be overcoated with solvent based and dispersion coating.
• Higher durability and resistance than conventional silicone based treatments.
• Does usually not change the appearance of the substrate.
•  Reduces chloride ion ingress and movement.
•  Does not act as a vapour barrier.

• Invisible protection against rain penetration.  
• Non-flammable formula.  
• Protects masonry, brick and stone.

• Extra-grip render bonding agent
• Contains a fine aggregate to improve render key
• One coat application – render when dry
• Red colour to indicate coverage
• Reduces suction on porous substrates
• Improves adhesion on smooth substrates
• Can be applied to damp surfaces
• Waterproof

      Viscosity at 23°C  15,000-50,000 cP Minimum Film Forming Temperature (°C) Approx 5 Bond Strength (EN13892-8) 3.2 N/mm² High Temperature Stability (4 Weeks @ 50°C)Stable

• Very good resistance to weathering
• Movement capability of ± 35 (ASTM C 719)
• Bubble-free curing
• Good workability
• Good adhesion to many substrates
• Solvent-free
• Very low emissions

 

• Very good resistance to weathering
• Movement capability of ± 35 (ASTM C 719)
• Bubble-free curing
• Good workability
• Good adhesion to many substrates
• Solvent-free
• Very low emissions

 

• Reduction of capillary water absorption.
• Reduces efflorescence.
• Reduces dirt penetration into the pores.
• Improves thermal insulation.
• Can be overcoated with solvent based and dispersion coating.
• Higher durability and resistance than conventional silicone based treatments.
• Does usually not change the appearance of the substrate.
•  Reduces chloride ion ingress and movement.
•  Does not act as a vapour barrier.

• Fast curing
• Standard guns can be used
• Can be used at low temperatures
• High load capacity
• ETA Approval available
• Non-sag, even overhead
• Styrene-free
• Low odour
• Low wastage

Sikadur®-31 CF Normal has the following advantages:

• Easy to mix and apply
• Very good adhesion to most construction materials
• High strength adhesive
• Thixotropic: non-sag in vertical and overhead applications
• Hardens without shrinkage
• Different coloured components (for mixing control)
• No primer needed
• High initial and ultimate mechanical strength
• Good abrasion resistance
• Impermeable to liquids and water vapour
• Good chemical resistance

• Can be used on damp concrete
• Excellent adhesion to the substrate
• Non-sag, also overhead
• High load capacity
• Shrinkage-free hardening
• Styrene-free