Product Data Sheet Show all documents
SikaCeram®-62

SikaCeram®-62

FlowFix Bonding Primer

SikaCeram®-62 FlowFix Bonding Primer is a ready to use (just add water) flexible, polymer modified, cementitious bonding primer.  Designed to deliver exceptional bonding of porcelain paving onto wet bedding mortar.

  • Easy and fast to mix
  • High strength
  • Fast curing
  • For exterior use only
  • Applied by brush or roller
Ask for a quote
Product Data Sheet Show all documents

Usage

Use on the underside of porcelain paving to give a high strength bond between the paving and bedding mortar  

Advantages

  • Easy and fast to mix
  • High strength
  • Fast curing
  • For exterior use only
  • Applied by brush or roller

Packaging

20 kg bags

Colour

Light Grey

Product Details

Product Information

Chemical Base

Cement based

Shelf Life

6 months from the date of manufacture

Storage Conditions

Keep in closed container, protect from frost, and store between +5 ˚C and 20 ˚C.

Density

2 g/cm3 (wet)

Application

Application Information

Mixing Ratio

Mix 20 kg of SikaCeram®-62 FlowFix Bonding Primer with 4.4 L of water

Layer Thickness

1-2 mm

Pot Life

20 minutes

Curing Time

Full cure: Approx. 72 hours

 
Consumption

Consumption

20 kg of SikaCeram®-62 FlowFix Bonding Primer will cover up to 15 m2 depending on the texture and porosity of the surface to be treated.
Application steps

MIXING

  • Mix SikaCeram®-62 FlowFix Bonding Primer (20 kg) with 4.4 L of clean water
  • Always add powder to water
  • Using a drill and spiral action mixer, mix the product with water for approx. 3 minutes
  • Do not create excess air bubbles during mixing
  • Do not mix more product than can be used within 25 minutes

APPLICATION

  • Apply the freshly mixed SikaCeram®-62 FlowFix Bonding Primer at a thickness of 1-2 mm to the underside of the tile
  • Use a brush or roller to apply the product
  • After applying the product to the underside, place the tile onto pre-prepared wet bedding mortar within 25 minutes (@ 20 °C) of application
  • SikaCeram®-62 FlowFix Bonding Primer must not be allowed to dry
  • Ensure the tile is level and has the required jointing space  

Documents