Product Data Sheet Show all documents

SikaCeram®-621

FlowFix Jointing Compound - Flowable Porcelain Grout Jointing Compound

SikaCeram®-621 FlowFix is a ready to use (just add water), flowable joint filling and grouting compound. It is fast to use and delivers exceptional bond strength - perfect for grouting large areas with joints 3-10 mm wide.

  • Fast setting with exceptional bond strength
  • Simply squeegee into joints for fast and effective application
  • Cures in 60 minutes to a non-permeable finish
  • Suitable for vehicular traffic
  • Can be applied to wet surfaces
  • Exterior use only
Ask for a quote
Product Data Sheet Show all documents

Usage

  • For use with porcelain or ceramic paving
  • Simple and fast application - ideal for large scale areas
  • Suitable for joints 3-10 mm wide and at least 20 mm deep
 

Advantages

  • Fast setting with exceptional bond strength
  • Simply squeegee into joints for fast and effective application
  • Cures in 60 minutes to a non-permeable finish
  • Suitable for vehicular traffic
  • Can be applied to wet surfaces
  • Exterior use only

Packaging

20 kg bags

Colour

Light Grey / Ivory /  Buff / Dark Grey Powder

Product Details

Product Information

Shelf Life

9 months

Storage Conditions

Protect SikaCeram®-621 FlowFix from frost and store between 5 ˚C and 20 ˚C

Density

Wet density: 2.21 g/cm3
Technical Information

Compressive Strength

Light Grey: 47.5 MPa

Ivory: 62.4 MPa

Dark Grey: 37.2 MPa

Buff: 37.2 MPa

Flexural Strength

8.1 MPa

Application

Application Information

Mixing Ratio

20 kg powder to 3.0 - 3.4 litres clean water

Ambient Air Temperature

Between +5 ˚C and 25 ˚C

Pot Life

20 minutes
Consumption

Consumption

One 20 kg bag of SikaCeram®-621 FlowFix correctly mixed with water will cover up to 40 m2 based on 900 mm x 600 mm pavers 5 mm wide and 20 mm deep.
Application steps

MIXING

  • Mix contents of the bag (20 kg) with 3.0- 3.4 litres of clean water using a drill and spiral action mixer
  • Always add powder to water
  • Mix for approx. 3 minutes until a smooth, lump free flowable mortar results
  • Do not overmix or create excessive air bubbles within the product
  • Do not mix more product than can be used within 20 minutes

APPLICATION

  • Pour SikaCeram®-621 FlowFix Jointing Compound into the joints immediately after mixing
  • Using a squeegee, work SikaCeram®-621 FlowFix Jointing Compound across the tiled area ensuring all joints are filled
  • Add more product to joints as required
  • Ensure product has hardened sufficiently before cleaning. This usually takes between 30-60 minutes depending on site conditions.

CLEANING OF TOOLS

  • Remove product residue from the tiled surface using a sponge float with clean fresh water
  • Any tough areas should be scrubbed with a stiff brush then washed away once the mortar has begun to cure
  • Do not brush over joints
  • Once the mortar has sufficiently set, the tiled area can be polished using a dry soft cloth to remove any final mortar residues
  • Ensure there is no residue of product left on the tiled surface  

Documents