Product Data Sheet Show all documents
EVERBUILD® JETCEM® RAPID

EVERBUILD® JETCEM® RAPID

Fast setting repair cement

EVERBUILD® JETCEM® RAPID is a specially formulated rapid setting cement based patching/repair compound which when mixed with water sets in about 30 minutes.

  • Rapid setting (30 minutes, depending on ambient temperature and conditions).
  • Easy mixing, just add water.
  • Fills up to 25mm in one application (for deeper holes in excess of 25mm use Jetcem Premix sand/cement)
Ask for a quote
Product Data Sheet Show all documents

Usage

  • Internal and external repairs to gaps and cracks and walls and floors.
  • Repairing flags, slabs, stones and bricks.
  • Patching steps and window sills.
  • Pointing brick and stone.
  • Jointing earthenware pipes and drains.
  • Repairs to ponds and pools.
  • Setting in W/C’s and sinks.
  • Leak sealing in concrete based surfaces.
  • Setting railings and posts.
 

Advantages

  • Rapid setting (30 minutes, depending on ambient temperature and conditions).
  • Easy mixing, just add water.
  • Fills up to 25mm in one application (for deeper holes in excess of 25mm use Jetcem Premix sand/cement)

Packaging

3kg & 6kg bags

Colour

Grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Tested to BSEN1504 - 3 Class R2
Product Information

Shelf Life

12 months in original unopened bag. This will reduce significantly once opened.

Storage Conditions

Store in cool dry conditions between + 5°C and 25°C. Storage outside these parameters will significantly reduce shelf life.

Application

Application steps

APPLICATION

  • Thoroughly wet surfaces to improve adhesion.
  • Always use a clean mixing vessel and add approx. 3 parts by volume powder to one part by volume clean cold water and mix immediately to a smooth, reasonably thick slump free paste. The mixed cement will remain workable for 5-10 minutes only. MIX NO MORE CEMENT THAN CAN BE USED IN 5 MINUTES
  • Press the cement into the repair with a trowel or filling knife.
  • Once the product begins to stiffen, throw away the residue. DO NOT ADD FURTHER WATER TO THE MIX. THIS WILL DESTROY STRENGTH.
  • In warm conditions, cover Jetcem with polythene to assist cure.
  • Clean tools etc with warm water before EVERBUILD® JETCEM® RAPID dries.

Documents