
Primer T-501
Primer T-501 is a 1-part, ready to use, solvent-based, polymeric primer for improving the adhesion properties of absorbent substrates.
- 1-part ready to use
- Easily applied by brush
- High adhesion to different structural decks and substrates
Usage
Primer:- Application of Sarnaplast®-2235 onto absorbent substrates/metals/Sarnafil® T
- Application of Sikagard®-950 on Sarnafil® T
Advantages
- 1-part ready to use
- Easily applied by brush
- High adhesion to different structural decks and substrates
Packaging
Container | 500 ml (400 g) includes brush |
Packing unit | Box with 6 or 1 container |
Refer to current price list for packaging variations
Colour
TransparentProduct Details
Chemical Base
Polymeric. Containing solvents.
Shelf Life
12 months from date of production
Storage Conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.
Density
~0,87 g/cm3 (+20 °C)
Volatile organic compound (VOC) content
VOC-CH | 90,00 % |
VOC-EU | 90,00 % |
Consistency
Liquid
Compatibility
Ancillary products | Sarnaplast®-2235 Sarnafil® T Clean |
Compatible substrates | Concrete, brick, plaster, screed, metal, ceramic, Sarnafil® T |
Incompatible substrates | Sarnafil® G/S |
Application
Ambient Air Temperature
+5 °C min
Substrate Temperature
+5 °C min
Waiting Time
Absorbent substrates | ~60 minutes |
Non-absorbent substrates | 30 minutes |
Consumption
Sarnaplast®-2235 | ~1 container /12 cartridges |
Sikagard®-950 | ~70–140 ml/m2 |
Consumption depends on the roughness and absorbency of the substrate. These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.Consumption depends on the roughness and absorbency of the substrate. These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.
SUBSTRATE QUALITY
The substrate must be solvent resistant, clean, dry, free of grease, bitumen, oil, paint coatings and dust.
SUBSTRATE PREPARATION
Use the appropriate preparation equipment to achieve the required substrate quality. If heavily contaminated or oiled, sheet metal decking must be cleaned with cleaner before applying the primer.
MIXING
1-part ready to use and must not be thinned or mixed with other products. Before use, stir product thoroughly.
APPLICATION
Application must be during dry weather at temperatures > +5 °C.
Apply a uniform, thin coat of Primer T-501 to the substrate by brush. Allow primer to dry tack free.
Absorbent substrates may require two coats. Allow sufficient overcoating time for 2- coats.
CLEANING OF TOOLS
Clean all tools and application equipment with Sarna Cleaner / Sarnafil® T Clean immediately after use. Hardened material can only be mechanically removed