Product Data Sheet Show all documents
S-Felt T-300

S-Felt T-300

Separation-, levelling- and protection-layer

S-Felt T-300 is a separation-, levelling- and protection layer made of polyester (PES).

  • Bitumen resistant
  • Non decaying
  • Suitable for mechanical fastening (drill proved)
  • Recyclable
Find a Technical Advisor
Product Data Sheet Show all documents

Usage

S-Felt T-300 is used as a separation and levelling layer between Sarnafil® or Sikaplan® membranes and incompatible substrates. S-Felt T-300 can also be used as a protection layer between Sarnafil® or Sikaplan® membranes and any protective topping or pavement.  

Advantages

  • Bitumen resistant
  • Non decaying
  • Suitable for mechanical fastening (drill proved)
  • Recyclable

Packaging

S-Felt T-300 rolls are wrapped individually in transparant PE-foil.

Packing unitsee price list
Roll length50.00 m
Roll width2.00 m
Roll weight30.00 kg

Colour

Surface

structured

Colour

white

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Reaction to fire according to EN 13501-1.
  • Quality management system EN ISO 9001/14001.
Product Information

Chemical Base

100 % PES fibres

Shelf Life

5 years from date of production and according to defined storage conditions in unopened, undamaged, original packaging.

Storage Conditions

Rolls must be stored between +5 °C and +30 °C, protected from direct sunlight, rain and snow. Do not stack pallets of rolls or any other material during transport or storage.

Length

50.00 m

Width

2.00 m (+/- 10 %)

Effective Thickness

2.50 mm (+/- 10 %)

(EN 29073-2)

Mass per unit area

300 g/m2  (+/- 10 %)

(EN 29073-1)
System information

System Structure

Ancillary products

Sarnacol®-2170

Sarnacol® T-660

Compatible products

All types of Sarnafil® and Sikaplan® membranes
Technical Information

Tensile Strength

longitudinal 

≥ 300 N/50 mm

transversal 

≥ 350 N/50 mm

Elongation

longitudinal

≤ 90 %

transversal

≤ 90 %

Reaction to Fire

Freely suspend

E-d2

On polystyrene board

E

On wood

E

On concreteE

Application

Application Information

Ambient Air Temperature

 -20 °C min. / +60 °C max.

Substrate Temperature

-30 °C min. / +60 °C max.
Application steps

APPLICATION

Installation works must be carried out only by Registered Sika Sarnafil Roofing Contractors.

Installation of some ancillary products, e.g. contact adhesives / cleaners is limited to temperatures above +5 °C. Please observe information given by Product Data Sheets.
Special measures may be compulsory for installation below +5 °C ambient temperature due to safety requirements in accordance with national regulations.

Documents