S-Felt A-300
Polypropylene levelling layer
S-Felt A-300 is a levelling layer made of polypropylene (PP).
- Bitumen resistant
- Easily applied
- Recyclable (Delete if recycling facilities or recycling offerings are not available in local country)
Polypropylene levelling layer
S-Felt A-300 is a levelling layer made of polypropylene (PP).
Rolls wrapped individually in a black PE-foil.
Length | 50,00 m |
Width | 2,00 m |
Weight | 30,00 kg |
Surface | Structured |
Colour | Multi-coloured |
100% polypropylene (PP)
5 years from date of production.
Product must be stored in original unopened and undamaged sealed packaging in dry conditions and temperatures between +5 °C and +30 °C. Store in a horizontal position. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage. Always refer to packaging.
50,00 m
2,00 m (+/- 2 %)
1,9 mm (+/- 10 %) | (EN 9863) |
300 g/m2 (+/- 10 %) | (EN 9864) |
The following products must be considered for use depending on roof design:
longitudinal | ≥ 300 N/50 mm |
transversal | ≥ 400 N/50 mm |
longitudinal | ≤ 75 % |
transversal | ≤ 75 % |
Class E | (EN 13501-1) |
-20 °C min. / +60 °C max.
-30 °C min. / +60 °C max.
S-Felt A-300 is loose laid accordance with installation instructions: Sarnafil® and Sikaplan®.
If necessary S-Felt A-300 can be spot bonded to the substrate with Sarnacol®-2170 or Sarnacol® T-660.
Adjoining sheets must overlap at least 50 mm.