SikaMur® InjectoCream-100

Silane-based injectable Damp Proof Course (DPC) for rising damp treatment

SikaMur® InjectoCream-100 is a new concept for the control of rising damp. SikaMur® InjectoCream-100 is a water repellent cream, packed in a 600 ml sausage or 300 ml cartridge. It is inserted into a series of holes drilled into a mortar course of the masonry by means of a simple application gun - no special injection pump required. Once injected into the mortar course, SikaMur® InjectoCream-100 will diffuse within the damp wall to form a Damp Proof Course (DPC), will allow the wall to dry and block future rising damp.
SikaMur® InjectoCream-100 complies with the requirements of WTA Guideline 4-4-04/D “Injection of masonry in order to avoid capillary moisture content”.

  • Easy to install (low risk for operative error, not so dependent on operative skills).
  • 1-component, ready to use.
  • Fast to install (no ‘double drilling’, no waiting for liquid to penetrate under pressure or gravity).
 
  • No need for preliminary watertight sealing around the injection holes (as with pressure systems).
  • Fast to inject (no waiting times required to pump in the material compared to pressure injection systems and no refilling as with gravity fed injection systems).
  • Consistent application rate (easy to calculate the amount of material that will be required).
  • Does not require a special expensive pump.
  • Spillage & mess virtually eliminated from the site (no problem with fluids flooding through party walls, cavities or service ducts).
  • Concentrated formula with approx. 80 % active ingredients (introduces a lower quantity of inactive carrier into the wall - much more effective results compared to less concentrated materials).
  • Low hazard, water based - non-caustic, non-flammable - not injected under pressure.
  • Very low wastage
  • Small waste disposal
  • No risk of increased efflorescence (as with siliconate rising damp treatments).