Product Data Sheet Show all documents
Sika® Remover-208

Sika® Remover-208

Solvent-based cleaning agent for strongly contaminated non-porous surfaces

Sika® Remover-208 is a solvent-based colourless clear cleaning agent for painted substrates. It is also used to remove traces of Sikaflex® products.  

  • Removes heavy contaminants
  • Suitable for most painted surfaces and plastics
  • Available in aerosol can
 
Ask for a quote
Product Data Sheet Show all documents

Primer Product Benefits

  • Removes heavy contaminants
  • Suitable for most painted surfaces and plastics
  • Available in aerosol can
 

Usage

Sika® Remover-208 is used to pre-clean strongly contaminated non-porous substrates. Sika® Remover-208 can be used to clean painted surfaces prior to bonding. Sika® Remover-208 can also be used to remove uncured excess of Sikaflex® adhesive or sealant from application tools or soiled surfaces. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.  

Advantages

  • Removes heavy contaminants
  • Suitable for most painted surfaces and plastics
  • Available in aerosol can
 

Packaging

Can1000 ml
 

Product Details

Typical Product Data
Chemical base

Solvent-based

Colour (CQP001-1)

Colourless, clear

Application temperature

5 ─ 40 °C

Application method

Wipe-on, wipe-off with lint-free paper towel

Shelf life

24 months A

CQP = Corporate Quality Procedure

A) stored in sealed container in up-right position in a dry place at ≤ 25 °C
Technical Information

IMPORTANT NOTE

Compatibility with the actual substrate is to be verified prior the application.

Discard any Sika® Remover-208 thats lost its clear appearance (contaminated).

Application

Application Information

Removal of uncured material

Remove the bulk of the Sikaflex® residue with a knife or spatula. Moisten a rag or towel with Sika® Remover-208 and wipe off the remaining adhesive or sealant.

Surface Cleaning

Wipe painted surfaces with a moistened rag or towel with Sika® Remover-208. Wet the paper towel with solvent by pouring the liquid onto the cloth. Never dip the paper towel into the Sika® Remover-208 as it may contaminate it! Wipe the surface with the wetted paper towel. Use fresh paper towels regularly in order to retain the cleansing power.

Before the solvent dries on the surface (evaporates), wipe it off with a clean, dry, lint-free paper towel.

Repeat the last two steps until no contaminants show up on a white paper towel.

Do not use on sensitive surfaces such as fresh paints.

Tightly reseal container immediately after each use.

 

Documents