Product Data Sheet Show all documents
EVERBUILD® JETCEM® DEEP

EVERBUILD® JETCEM® DEEP

A rapid setting cement, ideal for patch repairs on walls, floors, steps and kerbstones.

EVERBUILD® JETCEM® DEEP is a specially formulated rapid setting cement based patching/repair compound which when mixed with water sets in about 30 minutes

  • Rapid setting (30 minutes, depending on ambient temperature and conditions).
  • Easy mixing, just add water.
  • Fills deep hole from 2.5-15cm in one applications (for small holes <2.5cm use Jetcem).
  • Sets in the cold and wet.
Ask for a quote
Product Data Sheet Show all documents

Usage

  • Internal and external repairs to gaps, cracks, walls and floors.
  • Repairing flags, slabs, stones and bricks.
  • Patching steps and window sills.
  • Pointing brick and stone.
  • Jointing earthenware pipes and drains.
  • Repairs to ponds and pools.
  • Setting in W/C’s and sinks.
  • Leak sealing in concrete based surfaces.
  • Setting railings and posts.
 

Advantages

  • Rapid setting (30 minutes, depending on ambient temperature and conditions).
  • Easy mixing, just add water.
  • Fills deep hole from 2.5-15cm in one applications (for small holes <2.5cm use Jetcem).
  • Sets in the cold and wet.

Packaging

2kg & 6kg paper sack.

Colour

Grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

BSEN1504-3 Class R3
Product Information

Shelf Life

12 months in original unopened bag. This will reduce significantly once opened.

Storage Conditions

Store in cool dry conditions between + 5°C and 25°C.  Storage outside these parameters will significantly reduce shelf life.

Application

Application steps

APPLICATION

  • Thoroughly wet surfaces to improve adhesion.
  • Always use a clean mixing vessel and add approx. 3 parts by volume powder to one part by volume clean cold water and mix immediately to a smooth, reasonably thick slump free paste. The mixed cement will remain workable for 5-10 minutes only.  MIX NO MORE CEMENT THAN CAN BE USED IN 5 MINUTES
  • Press the cement into the repair with a trowel or filling knife.
  • Once the product begins to stiffen, throw away the residue. DO NOT ADD FURTHER WATER TO THE MIX. THIS WILL DESTROY STRENGTH.
  • In warm conditions, cover EVERBUILD® JETCEM® DEEP with polythene to assist cure.

CLEANING OF TOOLS

Clean tools with warm water before EVERBUILD® JETCEM® DEEP dries.

Documents