Product Data Sheet Show all documents
SikaCem® Désactivant 4-6

SikaCem® Désactivant 4-6

Aqueous phase surface retarder for concrete with very high curing performance

SikaCem® Désactivant 4-6 is an aqueous phase surface retarder which deactivates to a depth of 4–6 mm.
SikaCem® Désactivant 4-6 provides excellent curing performance.

SikaCem® Désactivant 4-6allows deactivation of depth from 4 to 6 mm and must be used with granulates of Dmax from 12 to 20 mm.
SikaCem® Désactivant 4-6 provides the following advantages :
  • aesthetic aspect with exposed aggregate appearance,
  • non skid for vehicles and pedestrians,
  • improved resistance to traffic.
Ask for a quote
Product Data Sheet Show all documents

Usage

SikaCem® Désactivant 4-6 can be used for public and private external floor surfaces, such as :
  • pedestrian zones,
  • driveways,
  • sidewalks,
  • housing development road systems,
  • patios,
  • swimming pool surrounds,
  • extruded concrete barriers.
 

Advantages

SikaCem® Désactivant 4-6allows deactivation of depth from 4 to 6 mm and must be used with granulates of Dmax from 12 to 20 mm.
SikaCem® Désactivant 4-6 provides the following advantages :
  • aesthetic aspect with exposed aggregate appearance,
  • non skid for vehicles and pedestrians,
  • improved resistance to traffic.

Packaging

  • 20 litre tub

Colour

White liquid

Product Details

Product Information

Shelf Life

12 months in unopened original packaging.
After use, packaging must be closed carefully and the remaining product must be used quickly.

Storage Conditions

Storage from +5°C to +25°C.
Protect from frost and high temperature.
If SikaCem® Désactivant 4-6 has been frozen, the product can recover original properties after storage at warm temperature and homogenization.

Density

≈ 1

pH-Value

≈ 4,0 ± 1,0

 

Application

Application Information

Ambient Air Temperature

During application, air, product and substrate temperature should be between +5°C and +35°C.
Consumption

Consumption

4 to 5 m2 per litre
Application steps

APPLICATION INSTRUCTIONS

It is recommended that a trial surface of approx. 1 m²
be prepared in addition to the site, to help assess the
optimum time at which to start washing down.

APPLICATION

  • Homogenize the product before use. When smoothing is complete, spray SikaCem® Désactivant 4-6 evenly in one spraying, all over the concrete surface to be treated, using a sprayer.
  • For better results, pre-wet the surface and wait for few minutes.
  • Wash the surface down with a high pressure water jet (100–150 bars max). Depending on weather conditions (temperature, sun, wind), the deactivation phase will start between 5 and 24 hours.
  • In the event of rain during this deactivation within 3 hours after spraying, immediate deactivation is recommended.
  • If any aggregates come loose during washing down, reduce the washing pressure or wait a bit longer.
  • After washing, pursue curing of concrete surface with SikaCem® Cure.
 

Documents