Product Data Sheet Show all documents

EVERBUILD® BLACK JACK® FLASHING TAPE FLASH

Self adhesive flashing tape with a natural lead-look finish

EVERBUILD® BLACK JACK® FLASHING TAPE FLASH is a strong self-adhesive flashing tape comprising of an aluminium foil and a bitumen rubber adhesive. The adhesive forms a strong waterproof seal by the simply pressing the tape into place by hand.

  • Replaces need for lead flashing.
  • Self-adhesive - requires no separate glue.
Tape Strength 3.5N/mm Flexibility at -15°C No cracking Application Temperature Range 5 to 40°C Weight1.4 kg/m²Bond Strength To Primed Concrete3.5N/mm
Ask for a quote
Product Data Sheet Show all documents

Usage

  • General repair to existing flashing.
  • Flashing bituminous felt and similar roofs.
  • Flashing parapet walls.
  • Replacement of lost lead flashing.
  • Repairs to cracks in concrete.
  • Repairs to lead gutters.
  • Sealing capping bolts in roof sheets.
  • Sealing roof ridges.
  • Protective coating to insulation materials.
  • Sealing projections through roofs and similar sections.
  • Flashing between timber and brickwork or blockwork or blockwork cavities.
  • Flashing of skylights
 

Advantages

  • Replaces need for lead flashing.
  • Self-adhesive - requires no separate glue.
Tape Strength 3.5N/mm Flexibility at -15°C No cracking Application Temperature Range 5 to 40°C Weight1.4 kg/m²Bond Strength To Primed Concrete3.5N/mm

Packaging

3m DIY Rolls in 100mm, 150mm and 225mm.

10m Trade Rolls in 75mm, 100mm, 150mm, 225mm, 300mm, 450mm.

Colour

Lead look

Product Details

Product Information

Shelf Life

24 months from date of manufacture in tightly sealed, undamaged containers.

Storage Conditions

Store in original container in cool (5 - 25°C) dry conditions.

Thickness

Foil Thickness - 50 µm

Adhesive Thickness - 1.3mm
Technical Information

Service Temperature

-10 to 80°C

Application

Application steps

SUBSTRATE PREPARATION

All surfaces must be dry, sound and free from oil, grease and dust. Remove all loose material by scraper or wire brush. Porous surfaces, such as concrete or brick, should be primed using Black Jack Bitumen and Flashing Primer and allowed to dry.

Documents