Product Data Sheet Show all documents
EVERBUILD® BLACK JACK® 907 SOLAR REFLECTIVE PAINT

EVERBUILD® BLACK JACK® 907 SOLAR REFLECTIVE PAINT

A thin bituminous-based aluminium protective paint

EVERBUILD® BLACK JACK® 907 SOLAR REFLECTIVE PAINT is a thin bituminous-based aluminium protective paint of brushable consistency which dries to a silvery finish. The product is specifically designed for application over primed metal walls and roofs to reduce heat absorption.

  • Fast drying - 1 hour at normal temperatures.
  • Prolongs life of roof repairs and bituminous coatings, which would otherwise be degraded by UV light.
Flashpoint40°CFire Resistance Wet: Flammable Dry: Will burn slowlyChemical And Water Resistance Resistant to: most salt solutions, water Not resistant to: oils, solvents, acids and alkalis
Ask for a quote
Product Data Sheet Show all documents

Usage

As a light/heat reflective coating over:
  • Primed metals.
  • Bituminous coatings (to prolong their life).
 

Advantages

  • Fast drying - 1 hour at normal temperatures.
  • Prolongs life of roof repairs and bituminous coatings, which would otherwise be degraded by UV light.
Flashpoint40°CFire Resistance Wet: Flammable Dry: Will burn slowlyChemical And Water Resistance Resistant to: most salt solutions, water Not resistant to: oils, solvents, acids and alkalis

Packaging

5L and 25L tins

Colour

Silver

Product Details

Product Information

Chemical Base

Bituminous-based

Shelf Life

Storage life 24 months in tightly sealed, undamaged containers.

Storage Conditions

EVERBUILD® BLACK JACK® 907 SOLAR REFLECTIVE PAINT contains a flammable solvent, and all normal precautions against fire must be taken during both storage and use. Store in original container in cool (5°C - 25°C) dry conditions. Keep away from sources of ignition.

Density

ca. 1 g/cm3 at 20°C

Application

Application Information

Ambient Air Temperature

6°C to 40°C (flash point). Surfaces must be free from ice and water.

Drying time

1 hour depending on drying conditions

 
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, dry and free from dust, dirt, oil, grease and loose material.

APPLICATION

EVERBUILD® BLACK JACK® 907 SOLAR REFLECTIVE PAINT must be stirred prior to use and periodically during application.

Apply two coats by brush or mohair roller, the second coat being applied as soon as the first coat is dry (1-2 hours).

Over recently applied bituminous coatings, allow the following minimum period to elapse after the final coat has dried before applying this product:

Hot applied products - 6 hours.

Solvent based coatings - 3 days.

Water based coatings - 2 weeks.

Over bituminous surfaces, apply the thinnest first coat necessary to obliterate the black colour of the bitumen. The second coat should also be thin. Avoid ponding. When brushing, use soft bristle brushes applying the lightest pressure.

CLEANING OF TOOLS

Tools may be cleaned by using white spirit. Any spillage should be wiped off surfaces before the bitumen paint has set.

Documents