Sika® Igolflex® P-10

Bitumen and solvent

12 months from date of production, if stored properly in unopened and undamaged original sealed packaging.

Dry storage at temperatures from +5°C up to +30°C. Protect from direct sunlight, rain, snow, ice, humidity, etc. Store in a horizontal position. Do not stack pallets of the membrane rolls on top of each other, or under pallets of any other materials during transport or storage.

0,95 ± 0,05 kg/L

23 °C (Method: closed cup)

54 % ± 2 %

+5 °C min. / +35 °C max.

+5 °C min. / +35 °C max.

apx. 2 hours (+23 °C)

Time is approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.

Concrete surfaces: 0,35-0,50 g/m²

Metallic surfaces: 0,20-0,30 g/m²

Substrate must be uniform, dry or slightly damp, free from dust, loose material, surface contamination, existing coatings, oil, grease and other materials, which could reduce adhesion of the coating. Surface defects (>5mm) such as blowholes, voids, honeycombing, etc. must be filled / repaired with suitable Sika® repair mortars.

Surfaces must be cleaned and prepared using suitable preparation techniques to provide a clean slightly textured surface. Defects must be repaired with an appropriate Sika® repair mortar.

Clean all tools and application equipment with Sika® Colma Cleaner immediately after use. Hardened material can only be removed mechanically.