Sika® Igolflex®-301
1-part elastomeric bituminous liquid applied membrane
Sika® Igolflex®-301 is a 1-part, water based, elastomeric bituminous liquid applied membrane for waterproofing against water ingress on horizontal and vertical surfaces.
- Seamless, no joints or seams
- Fully bonded system, prevents water underflow
- Low VOC emissions
- High crack bridging ability
- High elongation
- High adhesion to concrete
- Temporary UV resistance
- Ready to use and easy to apply
- Can be spray applied
Usage
Waterproofing- Waterproofing and damp proofing of below and above ground concrete structures to protect against water ingress
- Waterproofing beneath final finishes such as tiles in wet rooms and swimming pools
- Protecting concrete from aggressive atmospheric gases (CO2 and SO2)
- Localised repairs and detailing on slate-treated membranes
Advantages
- Seamless, no joints or seams
- Fully bonded system, prevents water underflow
- Low VOC emissions
- High crack bridging ability
- High elongation
- High adhesion to concrete
- Temporary UV resistance
- Ready to use and easy to apply
- Can be spray applied
Packaging
5, 10 and 20 kg containers
Refer to current price list for packaging variations.
Colour
Black
Product Details
APPROVALS / STANDARDS
- CE Marking and Declaration of Performance to EN 1504-2 - Surface protection systems for concrete - Coating
- CE Marking and Declaration of Performance to EN 14891 - Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives
- CE Marking and Declaration of Performance to EN 15814 - Polymer modified bituminous thick coatings for waterproofing
Chemical Base
Synthetic resins, bituminous emulsion, filler and additives.
Shelf Life
12 months from date of production
Storage Conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.
Density
| 1,50 ± 0,05 kg/L | (EN 2811-1) |
Flash Point
Non flammable
Solid content by weight
73–82 %
Volatile organic compound (VOC) content
| < 2 g/l | (EN 11890-2) |
Viscosity
> 40 Pa·s
System Structure
For surfaces >25 m2 or for components subject to strain, it is recommended to reinforce the product with Sika® Igolflex® F-05 reinforcement fabric.
| Layer | Product |
| 1. Base coat | Sika® Igolflex®-301 |
| 2. Reinforcement | Sika® Igolflex® F-05 |
| 3. Top coat | Sika® Igolflex®-301 |
Tensile Strength
| Without reinforcement | 1,4 ± 0,3 MPa |
Reinforced with Sika® Igolflex® F-05:
| Longitudinal | 660 ± 10 N |
| Transversal | 650 ± 10 N |
Tensile Adhesion Strength
| ≥ 2,5 MPa | (EN 1542) |
| To glass, steel and wood | ≥ 1,0 N/mm2 |
| To concrete: | ≥ 1,5 N/mm2 |
Crack Bridging Ability
| > 3,5 mm at 20 °C | (EN 14891) |
| ≥ 1,5 mm at -5 °C | (EN 14891) |
| Class CB2 | No damage for crack width ≥ 2 mm and dry layer thickness ≥ 3 mm |
Chemical Resistance
Resistant to aggressive substances in natural ground water and soil. Contact Sika Technical Services for additional information.
Permeability to Water Vapour
| 5 m ≤ Sd < 50 m - class II | (EN 7783) |
Water Tightness
| > 500 kPa | (EN 14891) |
Service Temperature
-30 °C min. / +80 °C max.
Reaction to Fire
| Class E | (EN13501-1) |
Application
Ambient Air Temperature
+5 °C min. / +35 °C max.
Relative Air Humidity
80 % r.h. max.
Substrate Temperature
+5 °C min. / +30 °C max.
Substrate Moisture Content
≤ 4 % parts by weight
Curing Time
~4 days at +20 °C
Time is approximate and will be affected by substrate, film thickness and changing ambient conditions particularly temperature and relative humidity.
Drying time
~6 hours at +20 °C
Time is approximate and will be affected by substrate, film thickness and changing ambient conditions particularly temperature and relative humidity.
Waiting Time / Overcoating
~24 hours at +20 °C
Time is approximate and will be affected by substrate, film thickness and changing ambient conditions particularly temperature and relative humidity.
Consumption
~1,5 kg/m² (wet film ~1,0 mm / dry film ~0,8 mm).
Waterproofing in two layers:
Maximum thickness per layer: 2,0 mm (dry film).
These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.
EQUIPMENT
Select the most appropriate equipment for all applications required for the project:
- Paintbrush
- Large brush,
- Roller,
- Trowel
- Air less spray equipment
SUBSTRATE QUALITY
Substrate must be uniform, dry or slightly damp, free from dust, loose material, surface contamination, existing coatings, oil, grease and other materials, which could reduce adhesion of the coating.
Suitable substrates: concrete, cementitious, brickwork, ceramic tiles, metal, plaster, plasterboard, wood and polystyrene.
SUBSTRATE PREPARATION
General
All dust, loose and friable material must be completely removed from all surfaces before application of the product and associated system products, preferably by vacuum extraction equipment.
To confirm adequate surface preparation and Sika® Igolflex®-301 adhesion, carry out a small trial before full application together with adhesion tests as required.
Cementitious substrates
Substrate must be sound with a minimum tensile adhesion strength of 1,5 N/mm2, clean, dry and free of all contaminants such as dirt, oil, grease, coatings, laitance, surface treatments and loose friable material.
Substrates must be prepared mechanically using suitable substrate preparation equipment to remove cement laitance and achieve an open textured gripping surface profile suitable for the product thickness.
High spots can be removed by grinding.
Weak cementitious substrates must be removed and surface defects such as blow holes and voids must be fully exposed.
Repairs to the substrate, filling of joints, blowholes/voids and surface levelling must be carried out using appropriate products from the Sikafloor®, Sikadur® and Sikagard® range of materials. Products must be cured before applying Sika® Igolflex®-301.
Brickwork
Mortar joints must be sound and preferably flush pointed. Use localised Sika® reinforcement over joints.
Ceramic tiles
Ensure all tiles are securely fixed. Replace any broken, loose or missing sections. Power wash and use Sika® Biowash as required.
Metal
Metals must be in a sound surface condition. Abrade exposed surfaces to a bright metal finish. Use localised Sika® reinforcement over joints and fixings.
Wood
Wood must be in good structural condition, firmly adhered or mechanically fixed.
Other substrates
Must be in good condition, firmly adhered or mechanically fixed.
CLEANING OF TOOLS
Clean all tools and application equipment with water immediately after use. Hardened Sika® Igolflex®-301 can be removed with Sika® Colma - Cleaner.