Product Data Sheet Show all documents

EVERBUILD® ROLL & STROLL® Hard Surface Protector

The Ultimate Self Adhesive Hard Surface Floor Protector

EVERBUILD® ROLL & STROLL® Hard Surface Protector is the ultimate self adhesive hard surface protector, ideal for protecting against mess, dirt, staining, spillages and soiling that occurs during painting, plastering, building, tiling, general maintenance and repair work. Totally waterproof, EVERBUILD® ROLL & STROLL® Hard Surface Protector protects against expensive to clean paint spillages on hard surfaces. Due to the adhesive face being reverse wound, EVERBUILD® ROLL & STROLL® Hard Surface Protector easily unwinds with minimum effort and no need to bend down.

  • Easy roll out with no specialist applicator equipment required.
  • Will not creep and wrinkle after application. Stays where it is put!
  • Totally waterproof.
  • Protects against expensive to clean spillages from paints, varnishes etc.
  • Easily removed, will not leave a sticky residue.
  • Can be left for up to 4 weeks *.
  • Adheres to most common hard surfaces.
  • Safer than dust sheets.
   
Ask for a quote
Product Data Sheet Show all documents

Usage

  • Ideal for protecting most hard surfaces including timber, ceramic tiles, laminate, vinyl, metal and stone. 
  • Can also be used to protect worktops, window cills, doors, kitchen units and glass.
 

Advantages

  • Easy roll out with no specialist applicator equipment required.
  • Will not creep and wrinkle after application. Stays where it is put!
  • Totally waterproof.
  • Protects against expensive to clean spillages from paints, varnishes etc.
  • Easily removed, will not leave a sticky residue.
  • Can be left for up to 4 weeks *.
  • Adheres to most common hard surfaces.
  • Safer than dust sheets.
   

Packaging

600mm x 25m and 600mm x 75m rolls

Product Details

Product Information

Shelf Life

36 months from date of manufacture

Storage Conditions

Store in cool dry conditions between 5 and 25°C. Safe in normal use however as a precaution keep polythene outer packaging away from children.

Thickness

90 μm

 

Application

Application steps

APPLICATION INSTRUCTIONS

Ensure surfaces to which EVERBUILD® ROLL & STROLL® Hard Surface Protector is to be applied are clean sound, dust free and dry. Remove outer packaging from roll. Place roll on the floor facing the direction it is to be applied and unwind approx 12 inches (300mm) of material. Ensure the roll is stuck by smoothing out by either hand or foot. Simply push roll forward using hands or feet ensuring roll goes in a straight line. Smooth out with hands or feet as it unwinds. A very effective way of laying EVERBUILD® ROLL & STROLL® Hard Surface Protector is to push the roll along with a soft broom/brush using the brush to smooth out and remove air bubbles as it unwinds. For application to worktops, glass etc roll and smooth out by hand until required length is reached. Carefully cut EVERBUILD® ROLL & STROLL® Hard Surface Protector with a sharp knife or scissors, take care not to damage or scratch the covered surface.

Documents