Product Data Sheet Show all documents
Sika® Pinkgrip® Solvent Free - SF

Sika® Pinkgrip® Solvent Free - SF

A DIRECT BOND SOLVENT FREE GAP FILLING ADHESIVE

Sika® Pinkgrip® Solvent Free can be used to replace mechanical fixings in a wide variety of home improvement applications. Ideal for bonding wood, brick, plaster, plasterboard, polystyrene, metals and plastics.

  • Solvent free formulation.
  • Excellent adhesion/bond strength - adheres to most common surfaces.
  • Enhanced slump resistance for quick simple direct bonding without the need for temporary support in many applications.
  • Good 'nip off' quality to prevent messy stringing of adhesive.
  • High solids formulation - excellent gap filling properties.
  • Extended open time - allows for easy repositioning after fixing.
  • Will adhere to damp surfaces.
  • Water clean up - no hazardous solvents.
Ask for a quote
Product Data Sheet Show all documents

Usage

  • Bonding dado rails, architraves and skirting.
  • Fixing wall cladding direct to internal wall surfaces or timber battens.
  • Fixing battens directly onto walls without fastenings.
  • Bonding carpet gripper systems to most floors without the need for nails or tacks.
  • Bonding stair nosing to concrete or wooden stairs.
  • Securing aluminium or other skin panels to the framework of portable industrial buildings and caravans.
 

Advantages

  • Solvent free formulation.
  • Excellent adhesion/bond strength - adheres to most common surfaces.
  • Enhanced slump resistance for quick simple direct bonding without the need for temporary support in many applications.
  • Good 'nip off' quality to prevent messy stringing of adhesive.
  • High solids formulation - excellent gap filling properties.
  • Extended open time - allows for easy repositioning after fixing.
  • Will adhere to damp surfaces.
  • Water clean up - no hazardous solvents.

Packaging

380 ml Plastic Catridge

Colour

Pink

Product Details

Product Information

Shelf Life

36 months

Storage Conditions

Store in original unopened containers between +5 and +25 °C

Density

1.5 - 1.55 g/cm3
Technical Information

Lap Shear Strength

                                         Strength (N/mm2)

Duration         Wood:Wood  Aluminium: Wood    PVC:Wood

1 day               2.0-2.5               1.0-1.5                         0.6-0.7

7 days             2.0-2.5               1.0-1.5                         0.6-0.7

Application

Application Information

Open Time

ca. 10 mins at +23 °C and 50 % R.H
Consumption

Consumption

1.5 x 380 ml cartridge per m2
Application steps

SUBSTRATE PREPARATION

The surfaces to be glued should be clean and free from dust, grease and other contaminants. Wood, plaster and brick may be damp but not running wet. Use mechanical abrasion to clean porous surfaces if necessary before application. Sika® PVA can be used to prime substrates.

APPLICATION

Apply Sika® PINK GRIP® SF to one side either in strips or daubs. Position the object to be fixed, then move from side to side and simultaneously apply pressure to achieve an even bond. If the object is wrongly positioned, slide it to the correct position. Finally, apply
maximum pressure for a short time (up to 1 minute). Wipe away any excess with a damp cloth making a neat joint between the two bonded surfaces. Temporary mechanical fixings may be required for heavy objects while full bond strength is reached.

 

Documents