Product Data Sheet Show all documents

Aquaseal Waterproof Tanking Membrane

A ready-to-use liquid waterproofing compound

Aquaseal® Waterproof Tanking Membrane is a ready-to-use liquid waterproofing compound that is applied as a 2-coat system by brush. It provides a permanently flexible watertight membrane on floors and walls prior to tiling in shower areas, wet rooms and wet zones, and other areas subject to water exposure such as balconies and partially covered external areas. Non-hazardous and solvent free, it is quick drying, and tiling can commence after 12 hours. Aquaseal® Waterproof Tanking Membrane can be used on its own in many applications where a flexible watertight membrane is required, or in conjunction with Aquaseal® Tanking Primer, Aquaseal® Tanking Tape and Aquaseal® Tanking Drain Mat, as part of the Aquaseal® Wet Room System, to provide a 100% waterproof membrane to conventional plaster and timber-based boards. It can be applied to all common building substrates such as plasterboard, MDF, plywood cementitious boards, blockwork, concrete & speciality wet room boards.  

  • Permanently flexible and watertight.
  • Can be used on most common building surfaces.
  • Ready to use, no diluting necessary.
  • Easy to apply by brush.
  • Non-hazardous, solvent free.
  • Can be tiled over after 12 hours.
Specific Gravity ca. 1.35 g/cm3 Solids Content 65-70% Drying Time Minimum 6 hours depending on ambient temperature. Coverage4-7.5 m2 per 5L depending on porosity of substrate.
Ask for a quote
Product Data Sheet Show all documents

Usage

  • For showers, wet rooms and wet zones in bathrooms
  • As a tanking membrane as part of the Aquaseal® Wet Room System
  • As a waterproof membrane on most common building surfaces
  • Balconies and partially covered external areas

Advantages

  • Permanently flexible and watertight.
  • Can be used on most common building surfaces.
  • Ready to use, no diluting necessary.
  • Easy to apply by brush.
  • Non-hazardous, solvent free.
  • Can be tiled over after 12 hours.
Specific Gravity ca. 1.35 g/cm3 Solids Content 65-70% Drying Time Minimum 6 hours depending on ambient temperature. Coverage4-7.5 m2 per 5L depending on porosity of substrate.

Packaging

5L pail

Colour

Blue paste

Product Details

Product Information

Shelf Life

24 months from the date of manufacture when stored according to manufacturers instructions.

Storage Conditions

Store in cool, dry conditions between +5°C and +25°C. Storage outside these parameters will dramatically reduce shelf life. Protect from frost.

Application

Application Information

Ambient Air Temperature

10°C to 35°C
Application steps

SUBSTRATE QUALITY

All surfaces must be clean, sound and dust-free.

Documents