Product Data Sheet Show all documents
EVERBUILD® 409 Block-Guard

EVERBUILD® 409 Block-Guard

Resin based block paving seal and joint stabiliser

EVERBUILD® 409 Block-Guard is a clear solvent based acrylic coating designed to bind jointing sand and form a durable seal over block paving and other mineral paver/flags. It penetrates deeply into pavers and jointing sand and then dries by solvent evaporation.

  • Long lasting acrylic based formula.
  • Helps facilitate easier cleaning.
Drying Time 3-4 hours between coats Application Temp Above 5°C and below 35°C Odour Mild solvent Coverage5-7m2/lt per coat (2 coat minimum)
Ask for a quote
Product Data Sheet Show all documents

Usage

  • Block paved drives and pathways.
  • Natural stone patio areas.
  • Cement based flagstones.
 

Advantages

  • Long lasting acrylic based formula.
  • Helps facilitate easier cleaning.
Drying Time 3-4 hours between coats Application Temp Above 5°C and below 35°C Odour Mild solvent Coverage5-7m2/lt per coat (2 coat minimum)

Packaging

5ltr & 25ltr metal tin

Colour

Clear liquid dries matt / satin

Product Details

Product Information

Shelf Life

24 months from date of manufacture in original unopened containers.

Storage Conditions

Store in cool, dry conditions between + 5 and + 25°C. PROTECT FROM FROST AND SOURCES OF IGNITION. Storage outside these parameters will dramatically reduce shelf life.

Application

Application steps

APPLICATION

NOTE: DO NOT APPLY BELOW +5˚C.

Apply EVERBUILD® 409 Block-Guard direct from the container using a watering can and long pile roller.  Work well into joints for maximum penetration. DO NOT LEAVE SURPLUS MATERIAL ON THE SURFACE. Ensure an even and thorough coverage, especially on textured flags/pavers where “ponding” of the product must be avoided. An uneven coating will give a blotchy/white appearance to areas where excess product has been allowed to settle and dry. These areas will look worse in wet conditions. Two coats are recommended allowing 3-4 hours between coats.

CLEANING OF TOOLS

Cured product can be cleaned with xylene.

Documents