Product Data Sheet Show all documents
EVERBUILD® FIX & FILL Expanding Foam

EVERBUILD® FIX & FILL Expanding Foam

One-part, quick-setting polyurethane foam

EVERBUILD® FIX & FILL is a quick-setting one-part polyurethane foam in aerosol form. FIX & FILL is supplied with attachable nozzles. The foam expands on application up to 150% its original volume . Once cured the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5°C to +30°C, ideally 20°C.

  • Quick setting - can be cut, sawn or plastered in 1 hour.
  • Economical in use - expands up to 55 times its original volume.
  • Fills irregular and broad gaps where most conventional fillers would fail.
  • Possesses insulating and sound deadening properties.
Expansion 41 litres (750ml can) 27 litres  (500ml can)   Cell Structure Medium fine Full Load Bearing Stability App, 24 hours (30mm bead) Working Temps5°C - 30°C. (Optimum 20°C)Temp Res Of Cured Bead Long Term:  -40 to +80°C Short Term: -40 to +100°CBuilding Material ClassB3
Ask for a quote
Product Data Sheet Show all documents

Usage

Filling
  • Gaps around pipe entries through walls
  • Gaps around window frames, door frames
  • Electrical wire chasing prior to plastering
  • Deep joints prior to applying sealant or plaster
  • Irregular gaps in stone, brick, concrete or plaster
Fixing     
  • Door frames
  • Timber structures
  • Window sills and thresholds
  • Window frames
Insulating
  • Behind cladding to exterior walls
  • Behind soffit and barge boards
 

Advantages

  • Quick setting - can be cut, sawn or plastered in 1 hour.
  • Economical in use - expands up to 55 times its original volume.
  • Fills irregular and broad gaps where most conventional fillers would fail.
  • Possesses insulating and sound deadening properties.
Expansion 41 litres (750ml can) 27 litres  (500ml can)   Cell Structure Medium fine Full Load Bearing Stability App, 24 hours (30mm bead) Working Temps5°C - 30°C. (Optimum 20°C)Temp Res Of Cured Bead Long Term:  -40 to +80°C Short Term: -40 to +100°CBuilding Material ClassB3

Packaging

500ml and 750ml aerosol

Product Details

Product Information

Shelf Life

12 months in original containers at stated storage temperatures.

Storage Conditions

Store upright between 10°C and 20°C. Pressurized container. Protect from sunlight and do not expose to temperatures above 50°C. Do not pierce or burn the can even after use. Store as flammable liquid.

Note: Elevated temperatures will reduce shelf life dramatically.
Technical Information

Compressive Strength

2.4-3.1N/cm² (DIN 53427) at 10% stress.

Tensile Strength

4.4-9 N/cm² (DIN 53430)

Shear Strength

4.1-4.7 N/cm² (DIN 53427)

Water Absorption

0.3 Vol % (DIN 53433)

Thermal Conductivity

0.04 W/Mk (DIN 52612)

Application

Application Information

Cutting Time

~150 mins for 30mm

Tack Free Time

~10 minutes
Application steps

SUBSTRATE PREPARATION

Ensure all surfaces are clean, sound and free from dust and loose particles. Moisten surfaces to be sealed with water. This assists the curing process.

Documents