Product Data Sheet Show all documents

EVERBUILD® Lumberjack® 5 Min PU Wood Adhesive

One part moisture curing wood adhesive in gel and liquid form

EVERBUILD® Lumberjack® 5 Min PU Wood Adhesive Liquid is red in colour and is ideal for larger applications, or in the workshop where greater economy is required. Sets hard in 5 minutes. Conforms to EN 204. D4 strength. EVERBUILD® Lumberjack® 5 Min PU Wood Adhesive Gel is a thixotropic, gap filling gel which sets hard in just 5 minutes. Particularly suitable for equipment manufacture and production line applications where rapid handling is required. Conforms to EN 204. D4 strength.

  • Fast setting – 5 minute set (Typical PVA based wood glue – 8-12 hours)
  • Exceptional bond strength to wood and most common building surfaces.
  • Internal and external use - excellent weathering and aging properties.
  • Fully water proof to EN204 D4.
  • Products foam slightly on application to fill small gaps and increase overall bond strength.
  • Excellent Chemical Resistance.
Specific Data Contents  100% prepolymers and catalyst (solvent free) Solids 100% (Solvent free) Viscosity Gel - 200×103  mPa.s
Liquid - 2×103  mPa.s
Ask for a quote
Product Data Sheet Show all documents

Usage

  • General wood jointing and construction
  • Window and door frame manufacture
  • Door manufacture
  • Furniture manufacture
  • Construction of staircases and ladders
  • As a high quality insulation adhesive for foam/glasswool/fibre boarding
 

Advantages

  • Fast setting – 5 minute set (Typical PVA based wood glue – 8-12 hours)
  • Exceptional bond strength to wood and most common building surfaces.
  • Internal and external use - excellent weathering and aging properties.
  • Fully water proof to EN204 D4.
  • Products foam slightly on application to fill small gaps and increase overall bond strength.
  • Excellent Chemical Resistance.
Specific Data Contents  100% prepolymers and catalyst (solvent free) Solids 100% (Solvent free) Viscosity Gel - 200×103  mPa.s
Liquid - 2×103  mPa.s

Packaging

Liquid - 750g Plastic Bottle / Gel - 310ml Cartridge

Colour

Liquid - Brown / Gel -Transparent

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Conforms to EN 204. D4 strength.
Product Information

Shelf Life

12 months from date of manufacture in original unopened containers. 

Storage Conditions

Store in original unopened containers between 5 and 25°C. Reseal immediately once used or disposal will be necessary.

Density

Liquid - 1.12g/cm3 / Gel - 1.10g/cm3

Application

Consumption

Yield

Liquid - Approx 400g/m2 / Gel - Approx 225-355ml/m2
Application steps

SUBSTRATE PREPARATION

The surfaces to be glued should be clean and free from dust, grease and other contaminants. At least one of the materials must be porous. Roughen non-porous surfaces to give a key for the adhesive. To assist cure and achieve maximum bond strength, slightly moisten one surface with a damp cloth. Do not over wet. 

Documents