Product Data Sheet Show all documents
EVERBUILD® MITRE FAST®

EVERBUILD® MITRE FAST®

two part instant adhesive system

Mitre Fast Bonding Kit is a two-part instant adhesive system comprising a cyanoacrylate adhesive and aerosol activator. Mitre Fast is mainly used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives. Also suitable for bonding of MDF, rubber, PVCu, metals etc.

  • Flash setting formulation - bonds most surfaces within 10 seconds, cutting down dramatically mitre assembly bonding times when compared to conventional wood adhesives.
  • High viscosity adhesive – low soak in to give greater bond strength than conventional cyanoacrylates on porous surfaces (eg wood)
  • Gap filling – high viscosity adhesive will fill small gaps in mitres etc (up to 0.2mm)
  • Economical in use.
Mitre Fast Activator
Chemical Base: Hydrocarbon solvent
Appearance: Colourless Mitre Fast Adhesive
Solids: 100 %
Thermal conductivity: 0.2 w/k.m
Gap filling: up to 0.2 mm
Refractive index: 1.45 (cured)
Dielectric strength: 11-13 kV/mm
Dielectric constant: 5.2 @ 1MHz (cured)
Softening point: 165 ºC
 
Ask for a quote
Product Data Sheet Show all documents

Usage

  • Multitude of industrial applications: Bonds MDF, wood, chipboard, rubber, plastics, Perspex, uPVC ceramics, aluminium and metals.
  • Ideal for all cornice and profile mitres, trims, picture frames, MDF, skirting and architrave joints, worktop end strips, PVCu trims and much more. It is particularly useful for production lines such as electronics assembly and uPVC window trim bonding.
 

Advantages

  • Flash setting formulation - bonds most surfaces within 10 seconds, cutting down dramatically mitre assembly bonding times when compared to conventional wood adhesives.
  • High viscosity adhesive – low soak in to give greater bond strength than conventional cyanoacrylates on porous surfaces (eg wood)
  • Gap filling – high viscosity adhesive will fill small gaps in mitres etc (up to 0.2mm)
  • Economical in use.
Mitre Fast Activator
Chemical Base: Hydrocarbon solvent
Appearance: Colourless Mitre Fast Adhesive
Solids: 100 %
Thermal conductivity: 0.2 w/k.m
Gap filling: up to 0.2 mm
Refractive index: 1.45 (cured)
Dielectric strength: 11-13 kV/mm
Dielectric constant: 5.2 @ 1MHz (cured)
Softening point: 165 ºC
 

Packaging

Standard Kit. Large Kit

Colour

Clear

Product Details

Product Information

Chemical Base

Cyanoacrylate

Shelf Life

12 months from date of manufacture in original unopened containers, depending on temperature of storage. As low temperature as possible will give maximum shelf life.

Storage Conditions

Store in original unopened containers between 4°C and 25°C. Reseal immediately once used. Protect activator from sources of ignition.

Density

Adhesive  - 1.07 g/cm3

Activator   - 0.79 g/cm3

Viscosity

Adhesive - 1,100 mPas @ 20°C.

Activator - 1 mPas @ 20°C.
Technical Information

Service Temperature

-20 to 80 ºC

Application

Application steps

SUBSTRATE PREPARATION

The surfaces to be glued should be clean, dry and free from dust, grease and other contaminants. Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times. Where possible, ensure working environment has a relative humidity of +50%.

Documents