Product Data Sheet Show all documents

EVERBUILD® PINKGRIP® SF BUT IT'S WHITE

Solvent free direct bond adhesive
 

EVERBUILD® PINKGRIP® SF BUT IT'S WHITE is a solvent free, white version of the brand leading Pinkgrip Direct Bond Adhesive.  It has all the unique benefits of Pinkgrip and will stick just about anything on a building site without the need for under pinning, thanks to the product's no-slump formula.

  • Solvent free - environmentally friendly formulation
  • Excellent adhesion/bond strength - adheres to most common surfaces.
  • Enhanced slump resistance for quick simple direct bonding without the need for temporary support in many applications.
  • Good “nip off” quality to prevent messy stringing of adhesive.
  • High solids formulation - excellent gap filling properties without shrinkage.
  • Extended open time - allows for easy repositioning after fixing.
  • Will adhere to damp surfaces.
  • Water clean up - no hazardous solvents.
Form White thixotropic paste (ready to use) Viscosity approx. 350,000 cPs Solids75-80%Flash PointNone (solvent free)Application Temp+4 to +35°CCompatibilityCan be used in contact with most building materials but should not be used against bituminous compounds or mirror backings.
Ask for a quote
Product Data Sheet Show all documents

Usage

  • Bonding dado rails, architrave’s and skirting.
  • Fixing wall cladding direct to internal wall surfaces or timber battens.
  • Fixing battens directly onto walls without fastenings.
  • Bonding carpet gripper systems to most floors without the need for nails or tacks.
  • Bonding stair nosing to concrete or wooden stairs.
  • Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans.
 

Advantages

  • Solvent free - environmentally friendly formulation
  • Excellent adhesion/bond strength - adheres to most common surfaces.
  • Enhanced slump resistance for quick simple direct bonding without the need for temporary support in many applications.
  • Good “nip off” quality to prevent messy stringing of adhesive.
  • High solids formulation - excellent gap filling properties without shrinkage.
  • Extended open time - allows for easy repositioning after fixing.
  • Will adhere to damp surfaces.
  • Water clean up - no hazardous solvents.
Form White thixotropic paste (ready to use) Viscosity approx. 350,000 cPs Solids75-80%Flash PointNone (solvent free)Application Temp+4 to +35°CCompatibilityCan be used in contact with most building materials but should not be used against bituminous compounds or mirror backings.

Packaging

380ml

Colour

White

Product Details

Product Information

Shelf Life

24 months

Storage Conditions

Store in original unopened containers between 15 and 20 °C

Density

~1.6 g/cm³
Technical Information

Service Temperature

-10 to +70°C

Application

Application Information

Curing Rate

Final cure: 24 - 48 hours depending on substrates

Open Time

Max 10 mins at 23°C and 50% R.H
Consumption

Consumption

1.5 x 380ml cartridges per m²
Application steps

SUBSTRATE PREPARATION

The surfaces to be glued should be clean and free from dust, grease and other contaminants. Wood, plaster and brick may be damp but not running wet. Use mechanical abrasion to clean porous surfaces if necessary before application.

Documents

Related Products