Product Data Sheet Show all documents

EVERBUILD® PINKGRIP®

Pinkgrip® is a revolutionary adhesive formulated for the professional user.

EVERBUILD® PINKGRIP® is a revolutionary new direct bond cartridge-applied adhesive formulated specifically for the professional user, using polymers at the leading edge of adhesive technology. EVERBUILD® PINKGRIP® bonds to virtually all common building surfaces and is designed for both external and internal use.

  • Enhanced slump resistance for quick and simple direct bonding to most substrates without the use of temporary supports in most applications.
  • Pink colour gives easy product recognition.
  • Excellent early and ultimate adhesive strength on both porous and non-porous substrates.
  • Excellent gap-filling properties to accommodate uneven surfaces.
  • Good “nip off” qualities to prevent messy stringing of the adhesive.
  • No need for double-stick applications or underpinning in many instances (although product may be used via double stick method if required).
  • Suitable for both vertical and horizontal use.
  • Suitable for use on both non-porous and porous surfaces.
  • Excellent external weathering properties
  • Suitable for interior and exterior use.
TEST Result Viscosity ~400,000 mPas Solids Content 70 +/- 1% Ash Rate45 +/- 1%VOC30 +/- 1 %Flash Point-10°C
Ask for a quote
Product Data Sheet Show all documents

Usage

  • Bonding dado rails, architrave and skirting.
  • Fixing parquet and cork flooring.
  • Fixing wall cladding direct to internal wall surfaces or timber battens.
  • Fixing battens directly onto walls without fastenings.
  • Bonding carpet gripper systems to most floors without the need for nails or tacks.
  • Bonding stair nosing to concrete or wooden stairs.
  • Fixing polyester, wood, uPVC or metal thresholds.
  • Fixing nameplates, plastic boxes, decorative frames, wall sockets and junction boxes to most surfaces.
  • Securing aluminium or other skin panels to the framework for portable industrial buildings and caravans.

Advantages

  • Enhanced slump resistance for quick and simple direct bonding to most substrates without the use of temporary supports in most applications.
  • Pink colour gives easy product recognition.
  • Excellent early and ultimate adhesive strength on both porous and non-porous substrates.
  • Excellent gap-filling properties to accommodate uneven surfaces.
  • Good “nip off” qualities to prevent messy stringing of the adhesive.
  • No need for double-stick applications or underpinning in many instances (although product may be used via double stick method if required).
  • Suitable for both vertical and horizontal use.
  • Suitable for use on both non-porous and porous surfaces.
  • Excellent external weathering properties
  • Suitable for interior and exterior use.
TEST Result Viscosity ~400,000 mPas Solids Content 70 +/- 1% Ash Rate45 +/- 1%VOC30 +/- 1 %Flash Point-10°C

Packaging

Cardboard cartridge

Colour

PINK

Product Details

Product Information

Shelf Life

12 months from date of manufacture in unopened containers.

Storage Conditions

Store in original unopened containers between 5°C and 25°C. Do not store above 30°C. Store as flammable goods.

Density

1.2 – 1.3 g/cm3

Consistency

Pink Paste
Technical Information

Chemical Resistance

Excellent to dilute acids and alkali, poor to most organic solvents.

Thermal Resistance

-20°C to +50°C

Application

Application Information

Ambient Air Temperature

+5°C to +40°C
Consumption

Consumption

Approx 10 linear meters
Application steps

SUBSTRATE PREPARATION

The surfaces to be glued must be clean, dry and free from dust, grease and other contaminants. New concrete or plaster should be allowed adequate time to dry and mature. If this is not possible, use EVERBUILD® GUN A NAIL®.

Porous or friable surface should first be primed with dilute contact adhesive or PVA and allowed to dry.

CLEANING OF TOOLS

Tools and excess adhesive can be cleaned using white spirit or turpentine substitute.

Documents