Product Data Sheet Show all documents

EVERBUILD STICK2® Contact Adhesive

General All Purpose Contact Adhesive for use with a wide variety of materials

EVERBUILD STICK2® Contact Adhesive is a premium grade rubber-based contact adhesive suitable for use with a wide variety of materials for both professional and DIY use. The product may be used internally and externally for bonding decorative laminates, all types of wood, rigid PVC, ABS, cork, linoleum, rubber, stone, metals and dense fabrics.

  • Excellent adhesion - adheres to most common surfaces.
  • Exceptional bond strength - out performs conventional wood glues.
  • Internal and external use (excluding 5ltr size) - excellent weathering and aging properties.
   Base Polychloroprene Solids 25 +/- 2 % Coverage 2.5 m² / litre (4-8 m2 Spray) Tack Life5 – 30 minutes (2-5 minutes spray)
Ask for a quote
Product Data Sheet Show all documents

Usage

  • Laminate materials
  • Bonding PU foam or mineral wool panels to plasterboard.
  • Bonding metals to most surfaces.
  • Bonds wood, rubber, most plastics and leather, cork, lino, rigid PVC.
 

Advantages

  • Excellent adhesion - adheres to most common surfaces.
  • Exceptional bond strength - out performs conventional wood glues.
  • Internal and external use (excluding 5ltr size) - excellent weathering and aging properties.
   Base Polychloroprene Solids 25 +/- 2 % Coverage 2.5 m² / litre (4-8 m2 Spray) Tack Life5 – 30 minutes (2-5 minutes spray)

Packaging

125 ml, 250 ml, 750 ml, 5 ltr and 500 ml Spray

Colour

Beige

Product Details

Product Information

Shelf Life

12 months from date of manufacture in original unopened containers.

Storage Conditions

Store in original unopened containers between 5 °Cand 25 °C away from sources of ignition.

Density

ca.0.86 g/cm³ at 20 °C

Viscosity

4500 +/- 1000 cP (much lower for spray)

Application

Application steps

SUBSTRATE PREPARATION

The surfaces to be glued should be clean and free from dust, grease and other contaminants. Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times and possible adhesion problems.

Documents