Product Data Sheet Show all documents

EVERBUILD® STIXALL®

The ultimate combined building adhesive and sealant, based on hybrid polymer technology, with the most Extreme power to both bond and seal virtually EVERYTHING to ANYTHING in virtually all conditions, even under water!

EVERBUILD® STIXALL® is a one part, chemically curing sealant and adhesive combining the best qualities of silicone and polyurethane technologies. It is specifically designed for adhering most common building surfaces to each other and themselves.

  • Incredible initial grab, gap filling properties & no slip.
  • High bonding strength.
  • Interior and exterior (as adhesive) use.
  • Can be applied to wet surfaces.
  • Waterproof & weatherproof.
  • Quick curing.
  • Overpaintable if required (with water based paints - test an inconspicuous area before use).
  • Resistant to temperature extremes -40 °C to +100 °C (+70 °C max for clear).
  • Resistant to chemicals (10 % dilute acids/alkalis, most solvents).
  • Excellent primerless adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, perspex, glass, wood, enamel, painted surfaces etc.
Find a Technical Advisor
Product Data Sheet Show all documents

Usage

Sealing and bonding in almost every application imaginable. The following are just some examples:
  • As a high quality nail replacement adhesive, even to damp surfaces.
  • Perimeter pointing around doors and windows, especially in mobile structures such as caravans.
  • Bonding mirrors to most common substrates.
  • Jointing cladding panels.
  • Any application requiring high performance, durable sealing and bonding of joints.
  • Applications where resistance to chemical spillage is required.
 

Advantages

  • Incredible initial grab, gap filling properties & no slip.
  • High bonding strength.
  • Interior and exterior (as adhesive) use.
  • Can be applied to wet surfaces.
  • Waterproof & weatherproof.
  • Quick curing.
  • Overpaintable if required (with water based paints - test an inconspicuous area before use).
  • Resistant to temperature extremes -40 °C to +100 °C (+70 °C max for clear).
  • Resistant to chemicals (10 % dilute acids/alkalis, most solvents).
  • Excellent primerless adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, perspex, glass, wood, enamel, painted surfaces etc.

Packaging

290 ml cartridge

80 ml squeezy tube

Colour

290 ml available in: Black, Brown, Grey, Anthracite and White

80 ml available in: Crystal Clear and White

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

CE and UKCA Marked to EN15651-1: 2012, Type F INT.
Product Information

Chemical Base

STP

Shelf Life

290 ml Cartridge = 12 months

80 ml Squeezy Tube = 24 months

Storage Conditions

Store in cool dry conditions between +5 °C and +25 °C. 

Density

~ 1.5 g/cm3 (Colours)

1.02 g/cm3 (Easi Squeeze Crystal Clear)

Consistency

Paste
Technical Information

Shore A Hardness

55-60

Tensile Strength

> 1.5 MPa

Thermal Resistance

-40 to +100 °C (Colours).

-40 to +70 °C (Easi Squeeze Crystal Clear).

Application

Application Information

Sagging

Nil

Ambient Air Temperature

+5 to +35 °C

Curing Rate

~1 mm / 24 h (at 23 °C and 50 % RH).

Skin Time

30 ± 10 min (at 23 °C and 50 % RH).
Consumption

Consumption

Approximately 10 linear metres per cartridge.

Approximately 3 linear metres per squeezy pack.
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean and dust free. Surfaces may be damp, but have no standing water. Can be used under water for emergency repair.

CLEANING OF TOOLS

Uncured material can be removed by wiping with a dampened cloth with white spirit. Cured material can be carefully removed by mechanical means. Full cure must be allowed before over painting.

Documents