Product Data Sheet Show all documents
Everbuild Tecnic® Silicone S50

Everbuild Tecnic® Silicone S50

A mid modulus, acetoxy curing silicone sealant

Everbuild Tecnic® Silicone S50 is a mid modulus, acetoxy curing silicone sealant that contains a powerful anti-fungal compound to prevent mould and fungal growth in areas of high humidity. It gives improved adhesion and flexibility when compared to standard high modulus sanitary grades.

  • High viscosity formula for quick easy tooling.
  • Flexible - movement accommodation of +/- 20%.
  • Waterproof seal.
  • Contains a powerful anti fungal compound to prevent mould growth.
Find a Technical Advisor
Product Data Sheet Show all documents

Usage

  • Sealing around all types of baths.
  • Sealing around shower trays.
  • Expansion joint and corner sealing of ceramic tiles.
  • Sealing around sanitary fittings in domestic and municipal applications.
  • General sealing in areas subject to high humidity levels.
  • As an adhesive for cosmetic bath & shower trim.
 

Advantages

  • High viscosity formula for quick easy tooling.
  • Flexible - movement accommodation of +/- 20%.
  • Waterproof seal.
  • Contains a powerful anti fungal compound to prevent mould growth.

Packaging

310ml cartridge

Colour

Jasmine, Manhattan Grey, Translucent, Sanitary White.

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • The mid modulus nature of the formulation gives improved adhesion and flexibility when compared to standard high modulus sanitary grades.
  • Conforms to ISO 11600 F/G20LM.
  • CE Marked under EN15651 for façade, glazing and sanitary application. Also certified for use in cold climates.
Product Information

Shelf Life

Use within 24 months.

Storage Conditions

Store in cool dry conditions between + 5˚C and 25˚C.

Density

ca.1,00 g/cm³ at 20 °C
Technical Information

Shore A Hardness

15

Elastic Recovery

>80%

Movement Capability

+/- 20% Movement Accommodation.

Service Temperature

-40°C to +150°C

Application

Application Information

Curing Time

3-4mm per day.

Skin Time

15 Minutes at 20˚C.
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion. Some surfaces may require priming - a small area should be tested first.
Everbuild Tecnic® Silicone S50 does not require a primer on most common surfaces, although adhesion tests are recommended prior to full scale application. If the joint is likely to be immersed or if adhesion is poor (especially on porous surfaces) use EVERBUILD SILICONE PRIMER P1. To improve adhesion (if required) to non-porous surfaces, prime with EVERBUILD SILICONE PRIMER NP2.

Documents