Sikaflex® Booster adhesive technology speeds the curing of single-component PUR and STP Sikaflex® adhesives. They are thus reducing handling time in industrial manufacturing.
Sikaflex® Booster is used since the mid 1990ies all over the world by vehicle manufacturers, and industrial component producers. In 2015 Sika introduced the PowerCure dispensing system for small unit use without need into bulk dispensing equipment. This flexible and cost-effective option enabled more companies to benefit from uniquely fast curing elastic adhesives.
"Sikaflex® Booster has been widely used in our production of trains as it ensures fast and complete curing of the adhesive regardless of the joint dimensions. Since Sika launched the PowerCure system, our staff has started to use the more flexible PowerCure system in areas that are difficult to reach like windows of the upper compartment. Sika’s Booster concept providing the same final performance of the adhesive, regardless if its moisture cured, cured by Sikaflex® Booster or the PowerCure system, has provided us with a very flexible and efficient solution."
Sika - your strategic partner for innovative fast-curing bonding solutions
Sika’s global team and local technical service provide expertise for improving bonding processes in industrial manufacturing. Sikaflex® Booster, designed for application from bulk packaging, and Sika’ PowerCure solution have proven its unique performance characteristics and are in use by many automotive and commercial vehicle manufacturers and producers of industrial goods.
Key Benefits of Sikaflex® Booster Adhesives
- Speeds up the adhesive curing reaction while maintaining adequate working time
- Can be interchanged with the corresponding 1C material
- Quick strength development for early fixation
- Complete and fast curing of large adhesive joints
See the Power of Sikaflex® Booster
Increased Production Output
Sikaflex® Booster adhesives offer a unique strength development profile. Quickly reaching handling strength allows the removal of fixtures soon after installation. Vehicles may be moved to the next workstation quicker, or assembly steps following may be done earlier.
Flexibility in Production Process
Sikaflex® Booster adhesives allow critical assembly steps to take place at a later time on the production process. Installing the glass only when the vehicles are almost finished, gives better access to mount interior components to buses or trains.
Fast Vehicle Turnaround in Aftermarket Repair
PowerCure adhesives have become the synonym for fast-curing adhesives for windshield and glass replacement. Sikaflex® Booster and PowerCure Adhesives cures much faster which allows significantly reduced waiting time, especially for commercial vehicles.
"Sika's PowerCure adhesive allowed us to provide unique services for auto glass replacement. The fast full cure provides peace of mind when it’s about calibration of advanced driver assistance systems (ADAS). Heavy windshields on commercial vehicles have never been replaced quicker than with Sika’ PowerCure adhesives. The minimal vehicle downtime is a big benefit for our customers."
Sika’s unique PowerCure Dispensing and Packaging Solution
Listening to our customers and understanding the challenges in industrial production led us to develop the cordless PowerCure adhesive dispenser and packaging system. PowerCure provides access to Sikaflex® Booster technology at a significantly lower investment. It is enabling more Sika customers benefiting from fast curing technology. The cordless PowerCure dispenser is the most convenient way to apply Sikaflex® Booster.
Key Benefits of Sika’s PowerCure Dispensing System:
- Accelerated, fast curing adhesives without pump investment
- Straightforward handling and rapid replacement of sausage
- Minimal packaging waste due to a collapsible cartridge
- Flexible processing in production - cordless power tool
- Ergonomic and simple handling
- Precise as industrial pump dosing and dispensing equipment
- Flexible and mobile use
Single motor design:
The battery-operated PowerCure Dispenser provides the precision of the pump and dosing systems found on vehicle manufacturers’ production lines. The use of a brushless motor mechanically couples extrusion, dosing, and dynamic mixing. Allowing users to control the flow rate on the go and without compromise.
- Efficient sausage packaging
- Significantly smaller waste value than any 2C system on the market
- Automatic opening by the PowerCure Dispenser
Environmentally-friendly:
Collapsible sausage, based on the standard of single-component adhesives. It is designed for high viscosity materials, to keep waste to a minimum and to allow for simple mounting and replacement of a unit. A small plastic cartridge contains a water-based hardener.
- Dynamic and efficient mixer
- Smaller waste volume than static mixers
- High throughput (up to 6ml/s)
- Available as screw-on adapter for custom nozzle design
Dynamic and efficient:
The mixer was designed to fit into the size of an ordinary application nozzle. The specially shaped v-cut supports the application of the adhesive at a convenient angle to the glass and cuts material consumption by up to 8%.