Sikagard® WallCoat PS-11
Waterborne, low emitting, UV resistant wall-coating system
Sikagard® WallCoat PS-11 is a wall-coating system based on waterborne technology, combined of a 2-component epoxy resin base coat with an easy to clean 2-component waterborne PU top coat.
- Seamless, easy to clean finish
- Good UV and yellowing resistance
- Very low emission of VOC
- Excellent resistance to repeated cleaning regimes using mild detergents and cleaning solutions
- Solvent free
- Good opacity
- Odourless
- Easy to apply
System Structure
Usage
- Application on cement and gypsum based renderings and skim coats
- Suitable for production facilities in the food and beverage industry, pharmaceutical industry and medical engineering.
Advantages
- Seamless, easy to clean finish
- Good UV and yellowing resistance
- Very low emission of VOC
- Excellent resistance to repeated cleaning regimes using mild detergents and cleaning solutions
- Solvent free
- Good opacity
- Odourless
- Easy to apply
Packaging
see Product Data Sheet
Colour
RAL and NCS colours on request, see section limitations
Appearance
matt
System Details
ENVIRONMENTAL INFORMATION
Conformity with LEED v2009 IEQc 4.2: Low-Emitting Materials - Paints and Coatings
System Structure
Sikagard® WallCoat PS-11
| Layer | Product |
| 1. Primer | Sikagard® Wallcoat N + 5 % water |
| 2. Top Coat | Sikafloor®-305 W |
Composition
| Sikagard® Wallcoat N | 2-c-epoxy resin, waterborne |
| Sikafloor®-305 N | 2-c-PU resin, waterborne |
Shelf Life
see Product Data Sheet
Storage Conditions
see Product Data Sheet
Chemical Resistance
Good chemical resistance to weak acids, alkalis, cleaning agents and disinfectants. Contact Sika Technical Service for specific information.
Disinfection with vaporised Hydrogen Peroxide: Resistant when using STERIS VHP Technology
Microbiological Resistance
see Product Data Sheet of Sikafloor®-305 W
Application
Ambient Air Temperature
+8 °C min. / +35 °C max.
Relative Air Humidity
≤ 80 %
Dew Point
Beware of condensation!
The substrate temperature and uncured material must be min 3 °C above dew point to reduce risk of condensation
Substrate Temperature
+8 °C min. / +35 °C max.
Substrate Moisture Content
- max. 6 % acc. Sika Tramex Meter
- max. 4 % acc. CM method
Waiting Time / Overcoating
see Product Data Sheet Sikagard® Wallcoat N
Consumption
| Layer | Product | Consumption |
| 1. Primer | Sikagard® Wallcoat N | ~0.20 kg/m² |
| 2. Top Coat | Sikafloor®-305 W | ~0.15 kg/m² |
CLEANING
The top coat of the system is tested in according to EN 11998:2006, wet scrub resistance. According to EN 13300 the product is classified in class 1. The surface can be cleaned with a wet sponge, using mild detergents, and washed with clean water.