Sikafloor® MultiDur EB-14
Sikafloor® MultiDur EB-14 is an epoxy, slip resistant, coloured, rigid flooring system. It provides a safe slip resistant surface in dry and wet conditions.
- Slip and skid resistant surface
- Good chemical and mechanical resistance
- Easy application
- Waterproof
- Conforms to the OS 8 German standards
Usage
Slip resistant resin flooring on cementitious substrates for:- Normal up to medium heavy wear
- Assembly halls
- Storage areas
- Food & beverage production areas
- Multi-storey and underground car park decks
- Loading and access ramps
- Workshops
- Garages
- Wet and dry production areas
- Interior and exterior use
Advantages
- Slip and skid resistant surface
- Good chemical and mechanical resistance
- Easy application
- Waterproof
- Conforms to the OS 8 German standards
Packaging
Refer to the individual Product Data Sheet
Colour
Available in many colours
Appearance
Slip resistant, gloss finish
System Details
APPROVALS / STANDARDS
- Coating System OS 8 Sikafloor®-156/-264, kiwa, Test report No. P 6078
- Slip resistance DIN 51130, Sikafloor®-264, Roxeler Baustoffprüfstelle Germany, Test report No. 020108-13-16
- Slip resistance DIN 51130, Sikafloor®-264, Roxeler Baustoffprüfstelle Germany, Test report No. 020171-14-3
System Structure
Sikafloor® MultiDur EB-14 system (~ 2–3 mm)
Layer | Product |
1. Scratch coat & quartz sand broadcast | Sikafloor®-151/-150 |
2. Wearing finish | Sikafloor®-264N |
Composition
Epoxy
Nominal thickness
~2,0–3,0 mm
Shelf Life
Refer to the individual Product Data Sheet
Storage Conditions
Refer to the individual Product Data Sheet
Chemical Resistance
Sikafloor®-264 provides the chemical resistance. Refer to Product Data Sheet.
Thermal Resistance
Exposure* | Dry heat |
Permanent | +50 °C |
Short-term max. 7 days | +80 °C |
Short-term max. 12 hours | +100 °C |
Short-term moist/wet heat* up to +80 °C where exposure is only occasional (i.e. during steam cleaning etc.)
*No simultaneous chemical and mechanical exposure.
Skid / Slip Resistance
R11 V4 | (DIN 51130) |
R12 V6 | (DIN 51130) |
Application
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
≤ 80 % max.
Dew Point
Beware of condensation.
The substrate and uncured applied floor material must be at least +3 °C above dew point to reduce the risk of condensation or blooming on the surface of the applied product.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
≤ 4 % parts by weight
Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method.
No rising moisture according to ASTM (Polyethylene-sheet).
Waiting Time / Overcoating
Before applying Sikafloor®-264 on Sikafloor®-156/-151 allow:
Substrate temperature | Minimum | Maximum |
+10 °C | 24 hours | 3 days |
+20 °C | 12 hours | 2 days |
+30 °C | 8 hours | 1 day |
Before applying Sikafloor®-264 on Sikafloor®-264 allow:
Title 1Substrate temperature | Minimum | Maximum |
+10 °C | 30 hours | 48 hours |
+20 °C | 24 hours | 24 hours |
+30 °C | 16 hours | 30 hours |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity
Applied Product Ready for Use
Temperature | Foot traffic | Light traffic | Full cure |
+10 °C | ~72 hours | ~6 days | ~10 days |
+20 °C | ~24 hours | ~4 days | ~7 days |
+30 °C | ~18 hours | ~2 days | ~5 days |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity
Consumption
Sikafloor® MultiDur EB-14 system
Layer | Product | Consumption |
Scratch Coat (if required for irregular or porous surface) | 1 × Sikafloor®-150/-151/-161 at 1:0.5 with quartz sand 0.1–0.4mm | ~1,8 kg/m² |
Primer | 1-2 x Sikafloor®-150/-151/-161 | 1-2 x 0.35 - 0.55 kg/m² |
Broadcast | Quartz Sand( 0,4-0,7 mm) to excess | ~4–6 kg/m² |
Wearing finish | 1 × Sikafloor®-264N | ~0,6 – 0,8 kg/m² |
CLEANING
Refer to Sika Method Statement: Sikafloor®-Cleaning Regime