Sikafloor® MultiDur EB- 10
Slip-resistant, coloured, epoxy floor coating system
Sikafloor® MultiDur EB- 10 is a broadcast, coloured, rigid epoxy floor coating system for areas subject to traffic and high mechanical loads.
- Low odour
- Low VOC emissions
- Good mechanical resistance
- Good resistance to specific chemicals
- Good slip resistance
- Low maintenance
- Seamless
System Structure
Usage
Sikafloor® MultiDur EB- 10 is used in industrial buildings such as:- Car park decks
- Food and beverage facilities
- Logistics facilities and warehouses
- Manufacturing facilities and workshops
- The System may only be used by experienced professionals.
- The System may only be used for interior applications.
Advantages
- Low odour
- Low VOC emissions
- Good mechanical resistance
- Good resistance to specific chemicals
- Good slip resistance
- Low maintenance
- Seamless
Colour
Available in various colour shades
Appearance
Slip-resistant, gloss finish
System Details
APPROVALS / STANDARDS
-
Reaction to fire EN 13501-1, Sikafloor® MultiDur EB-10, GHENT, Test Report No. CR 24-1080-01
System Structure
Sikafloor® MultiDur EB- 10
| Layer | Product | |
| 1. | Scratch coat | Sikafloor®-150 Sikafloor®-150 Plus Sikafloor®-151 Sikafloor®-1590 In addition, broadcast in excess with Quartz sand (0.3–0.8 mm). Contact Sika Technical Service for information on choosing the right primer for your project. |
| 2. | Top coat | Sikafloor®-264 Plus |
Composition
Epoxy
Nominal thickness
2 mm to 3 mm
Tensile adhesion strength
≥ 1.5 MPa | (EN 1542) |
Reaction to Fire
Class Bfl-s1 | (EN 13501-1) |
Chemical Resistance
Laboratory-defined resistance to many individual chemicals. Before proceeding, contact Sika Technical Service for specific information.
Skid / Slip Resistance
| Class | R 12 |
Application
Ambient Air Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Relative Air Humidity
Maximum | 80 % r.h. |
Dew Point
Refer to the individual Product Data Sheet.
Substrate Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Substrate Moisture Content
Refer to the individual Product Data Sheet.
Waiting Time / Overcoating
When using Sikafloor®-1590 refer to the individual Product Data Sheet for specific information on waiting time to overcoating.
Before applying Sikafloor®-264 Plus on the broadcast primer allow:
Temperature | Minimum | Maximum |
+10 °C | 17 hours | 3 days |
+20 °C | 9 hours | 48 hours |
+30 °C | 7 hours | 24 hours |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | 30 hours | 6 days | 10 days |
| +20 °C | 24 hours | 4 days | 7 days |
| +30 °C | 16 hours | 2 days | 5 days |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Consumption
Layer | Product | Consumption |
Scratch coat | Sikafloor®-150 Sikafloor®-150 Plus Sikafloor®-151 Sikafloor®-1590 In addition, broadcast in excess with Quartz sand (0.3–0.8 mm). | 1 × 1.7–1.8 kg/m2 filled with up to 100 % quartz sand (0.1–0.3 mm). Refer to the individual Product Data Sheet 4–6 kg/m² broadcast |
Top coat | Sikafloor®-264 Plus | 1 × 0.6–0.8 kg/m² |
Note: Consumption data is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level, wastage or any other variations. Apply the Product to a test area to calculate the exact consumption for the specific substrate conditions and proposed application equipment.