Sikafloor® MultiFlex PB-32
Slip-resistant, tough-elastic polyurethane flooring system
Sikafloor® MultiFlex PB-32 is a slip-resistant, tough-elastic polyurethane flooring system. It is part of the Sikafloor® MultiFlex flooring range.
- Good mechanical resistance
- Good resistance to specific chemicals
- Good resistance to abrasion
- Seamless
- Low VOC content
- Low maintenance
Usage
The System is used in industrial buildings such as:- Car park decks
- Automotive facilities
- Logistics facilities and warehouses
- The System may only be used for interior applications.
Advantages
- Good mechanical resistance
- Good resistance to specific chemicals
- Good resistance to abrasion
- Seamless
- Low VOC content
- Low maintenance
Colour
Available in various colour shades.
Appearance
Slip resistant, gloss finish
System Details
APPROVALS / STANDARDS
Fire Classification Report EN 13501-1, GHENT, No. CR 21-0416-01
Slip resistance DIN EN 16165, Roxeler, Certificate No. 020221-22-14
System Structure
Sikafloor® MultiFlex PB-32
| Layer | Product | |
| 1. | Primer | Sikafloor®-150 Sikafloor®-151 Sikafloor®-156 Sikafloor®-161 Sikafloor®-1590 Contact Sika technical service for information on choosing the right primer for your project. |
| 2. | Wearing layer | Sikafloor®-3240 filled 1 : 0.5 with Quartz sand (0.1–0.3 mm) by weight Broadcast to excess with Quartz sand (0.3–0.8 mm) |
| 3. | Seal coat | Sikafloor®-378 |
For hot poured or mastic asphalt substrates use Sikafloor®-3240 as an alternative primer.
Composition
Combination of epoxy and polyurethane
Nominal thickness
~3.0 mm
Tensile adhesion strength
≥ 1.5 MPa | (EN 1542) |
Reaction to Fire
Class Bfl-s1 | (EN 13501-1) |
Skid / Slip Resistance
R 11; V 4 | (DIN EN 16165) |
Application
Ambient Air Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Relative Air Humidity
Maximum | 80 % r.h. |
Dew Point
Refer to the individual Product Data Sheet.
Substrate Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Substrate Moisture Content
Refer to the individual Product Data Sheet.
Waiting Time / Overcoating
When using Sikafloor®-1590 refer to the individual Product Data Sheet for specific information on waiting time to overcoating.
Before applying Sikafloor®-3240 over the primer, allow:
Temperature | Minimum | Maximum |
+10 °C | 17 hours | 4 days |
+20 °C | 9 hours | 2 days |
+30 °C | 7 hours | 1 day |
Before applying Sikafloor®-378 on Sikafloor®-3240 allow:
Temperature | Minimum | Maximum |
+10 °C | 24 hours | 3 days |
+20 °C | 12 hours | 48 hours |
+30 °C | 8 hours | 36 hours |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Applied Product Ready for Use
Temperature | Foot traffic | Light traffic | Full cure |
+10 °C | 72 hours | 6 days | 10 days |
+20 °C | 24 hours | 4 days | 7 days |
+30 °C | 18 hours | 2 days | 5 days |
Note: Times apply when the last layer of the system has been applied. Times are affected by changing ambient conditions, particularly temperature and relative humidity.
Consumption
| Layer | Product | Consumption |
| Primer | Sikafloor®-150 Sikafloor®-151 Sikafloor®-156 Sikafloor®-161 Sikafloor®-1590 | 1-2 × 0.3–0.5 kg/m² |
| Levelling | Sikafloor®-150 Sikafloor®-151 Sikafloor®-156 Sikafloor®-161 Sikafloor®-1590 | Refer to the individual Product Data Sheet. |
| Wearing layer | Sikafloor®-3240 filled 1 : 0.5 with Quartz sand (0.1–0.3 mm) by weight Broadcast to excess with Quartz sand (0.3–0.8 mm) | 1 × 1.8–2.0 kg/m² 4.0–5.0 kg/m² |
| Seal coat | Sikafloor®-378 | 1 × 0.7–0.9 kg/m² |
Note: Consumption data is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level, wastage or any other variations. Apply product to a test area to calculate the exact consumption for the specific substrate conditions and proposed application equipment.