Sikafloor® MultiDur WS-10
Sikafloor® MultiDur WS-10 is a 2-part, water-based, epoxy resin, low VOC, smooth floor coating system
- Thickness 0,2–0,3 mm
- Low VOC / AMC emissions
- Seamless
- Good chemical and mechanical resistance
- Easy application
- Water vapour permeable
- Water thinnable
- Easy cleanability
Usage
Industrial resin flooring on cementitious substrates for:- Normal up to medium heavy wear
- Storage areas
- Assembly halls
- Workshops
- Garages
- Processing areas
- Warehouses
- Multi-storey and underground car park decks
- Interior use only
Advantages
- Thickness 0,2–0,3 mm
- Low VOC / AMC emissions
- Seamless
- Good chemical and mechanical resistance
- Easy application
- Water vapour permeable
- Water thinnable
- Easy cleanability
Packaging
Refer to the individual Product Data Sheets
Colour
Available in many colours
Appearance
Smooth, semi-gloss finish
System Details
ENVIRONMENTAL INFORMATION
- VOC emission classification of building materials RTS M1
- VOC emission test report according to AgBB und DIBt approval requirements, test report G18793B-1
- Class A+ according to French Regulation on VOC emissions, test report 392-2014-00087005C-1
APPROVALS / STANDARDS
- CE Marking and Declaration of Performance to EN 1504-2 - Surface protection product for concrete - Coating
- CE Marking and Declaration of Performance to EN 13813 - Resin screed material for internal use in buildings
- Biological Resistance ISO 846, Sikafloor®-2540 W, CSM Fraunhofer, Approval No SI 1212-624
- Fire Testing DIN EN 13501-1, Sikafloor®-MultiDur WS-10, Hoch, Report No KB-Hoch-180711
- Fire Testing DIN EN ISO 11925-2, Sikafloor®-MultiDur WS-10, Hoch, Report No PB-Hoch-180709
- Fire Testing DIN EN ISO 9239-1, Sikafloor®-MultiDur WS-10, Hoch, Report No PB-Hoch-180710
- Migration Behaviour EN 1186, EN 13130, CEN/TS 14234, Sikafloor®-2540 W, ISEGA, Certificate No. 48312 U 18
- Outgassing Emissions VOC VDI 2083-17, Sikafloor®-2540 W, CSM Fraunhofer, Certificate No SI 1212-62
- Particle Emission EU GMP Annex 1, Sikafloor®-2540 W, CSM Fraunhofer, Certificate No SI 1212-624
System Structure
Sikafloor® MultiDur WS-10 system (~0.2-0.3 mm)
Layer | Product |
1. Primer | Sikafloor®-2540 W |
2. Top coat | Sikafloor®-2540 W |
Composition
Water-based epoxy
Nominal Thickness
~0.2–0.3 mm
Shelf Life
Refer to the individual Product Data Sheets
Storage Conditions
Refer to the individual Product Data Sheets
Abrasion Resistance
~63 mg (CS 10/1000/1000) (14 days / +23°C) | (EN ISO 5470-1 Taber Abrader Test) |
Reaction to Fire
Bfl-S1 | (DIN EN 13501-1) |
Chemical Resistance
Resistant to many chemicals. Contact Sika Technical Service for specific information
Thermal Resistance
Exposure* | Dry heat |
Permanent | +60 °C |
Short-term max. 7 days | +80 °C |
Short-term max. 12 hours | +100 °C |
Short-term moist/wet heat* up to +80 °C where exposure is temporary (i.e. during steam cleaning etc.)
*No simultaneous chemical and mechanical exposure.
Skid / Slip Resistance
R9 | (DIN 51130) |
Application
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
< 75 % maximum. Adequate fresh air ventilation must be provided to remove excess moisture during curing.
Dew Point
Beware of condensation.
The substrate and uncured floor must be at least +3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
≤ 6 % parts by weight
The following test methods can be used: Sika®-Tramex meter, CM - measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
Waiting Time / Overcoating
Before applying Sikafloor®-2540 W on Sikafloor®-2540 W allow:
Substrate temperature | Minimum | Maximum |
+10 °C | 48 hours | 7 days |
+20 °C | 20 hours | 6 days |
+30 °C | 10 hours | 3 days |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
If relative air humidity is ≥ 75 % the waiting time is increased by at least 24 hours.
Applied Product Ready for Use
Temperature | Foot traffic | Light traffic | Full cure |
+10 °C | ~48 hours | ~5 days | ~10 days |
+20 °C | ~20 hours | ~3 days | ~7 days |
+30 °C | ~10 hours | ~ 2 days | ~5 days |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
Consumption
Sikafloor® MultiDur WS-10 system (~0.2–0.3 mm)
Coating System | Product | Consumption |
1.Primer | 1 × Sikafloor®-2540 W + 5% water by weight | ~0.2–0.3 kg/m² |
2.Top coat | 1–2 × Sikafloor®-2540 W | ~0.2–0.3 kg/m² / layer |
CLEANING
Refer to the Information Manual Sikafloor®-Cleaning Regime