Sikafloor® MultiDur EB-20
Slip-resistant, sand broadcasted, coloured, epoxy floor coating system
Sikafloor® MultiDur EB-20 is a sand broadcasted, coloured, rigid floor coating system based on epoxy resins. It provides a hard-wearing, seamless, low-maintenance gloss finish.
- Low odour
- Low VOC emissions
- Good resistance to abrasion
- Good resistance to specific chemicals
- Good mechanical resistance
- Seamless
System Structure
Usage
Sikafloor® MultiDur EB-20 is used in industrial buildings such as:- Car park decks
- Food and beverage facilities
- Logistics facilities and warehouses
- Manufacturing facilities and workshops
- The System may only be used for interior applications.
Advantages
- Low odour
- Low VOC emissions
- Good resistance to abrasion
- Good resistance to specific chemicals
- Good mechanical resistance
- Seamless
Colour
Available in various colour shades
Appearance
Slip-resistant, gloss finish
System Details
APPROVALS / STANDARDS
-
Reaction to fire EN 13501-1, Sikafloor® MultiDur EB-20, Ghent, Test Report No. CR 24-1081-02
System Structure
Sikafloor® MultiDur EB-20
| Layer | Product |
| 1. Primer | Sikafloor®-150, or Sikafloor®-151, or Sikafloor®-1590 |
| 2. Wearing layer | Sikafloor®-264 Plus filled up to 1:1 with Quartz sand (0.1–0.3 mm) |
| 3. Sand Broadcast | Broadcast with Quartz sand (0.3–0.8 mm) |
| 4. Top coat | Sikafloor®-264 Plus |
Contact Sika Technical Service for information on choosing the right primer for your project.
Composition
Epoxy
Nominal thickness
2 mm to 4 mm
Tensile adhesion strength
≥ 1.5 MPa | (EN 1542) |
Reaction to Fire
Class Bfl-s1 | (EN 13501-1) |
Chemical Resistance
Laboratory-defined resistance to many individual chemicals. Before proceeding, contact Sika Technical Service for specific information.
Skid / Slip Resistance
| Class | R 12 |
Application
Ambient Air Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Relative Air Humidity
Maximum | 80 % r.h. |
Dew Point
Refer to the individual Product Data Sheet.
Substrate Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Substrate Moisture Content
Refer to the individual Product Data Sheet.
Waiting Time / Overcoating
When using Sikafloor®-1590 refer to the individual Product Data Sheet for specific information on waiting time to overcoating.
Before applying Sikafloor®-264 Plus on the primer layer allow:
Temperature | Minimum | Maximum |
+10 °C | 17 hours | 3 days |
+20 °C | 9 hours | 48 hours |
+30 °C | 7 hours | 24 hours |
Before applying Sikafloor®-264 Plus on Sikafloor®-264 Plus allow:
Temperature | Minimum | Maximum |
+10 °C | 30 hours | 48 hours |
+20 °C | 24 hours | 30 hours |
+30 °C | 16 hours | 24 hours |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Applied Product Ready for Use
Temperature | Foot traffic | Light traffic | Full cure |
+10 °C | 30 hours | 6 days | 10 days |
+20 °C | 24 hours | 4 days | 7 days |
+30 °C | 16 hours | 2 days | 5 days |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Consumption
| Layer | Product | Consumption |
| 1. Primer | Sikafloor®-150, or Sikafloor®-151, or Sikafloor®-1590 | 1–2 × 0.3–0.5 kg/m² |
| 2. Wearing layer | Sikafloor®-264 Plus filled up to 1:1 with Quartz sand (0.1–0.3 mm) | ~ 4 kg /m2 (2 kg/m² binder + 2 kg/m² quartz sand) |
| 3. Sand Broadcast | Broadcast with Quartz sand (0.3–0.8 mm) | 4–6 kg/m² |
| 4. Top coat | Sikafloor®-264 Plus | 1 × 0.6–0.8 kg/m² |
Note: Consumption data is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level, wastage or any other variations. Apply the product to a test area to calculate the exact consumption of the specific substrate conditions and proposed application equipment.