Product Data Sheet Show all documents

EVERBUILD® Weather Mate®

An advanced gap filler and adhesive for the ultimate all weather applications.

EVERBUILD® Weather Mate® is a multi-use elastic filler that can be applied in wet weather and to wet surfaces, even under water, remaining permanently flexible. Intended for external use only it can be overpainted with most paints and woodstains when cured. Adheres to most common surfaces.

  • Can be applied in all weathers.
  • Sticks to wet surfaces.
  • Resists all weather conditions.
  • Permanently flexible.
  • Can be used in conjunction with Bitumen and asphalt.
Shrinkage ca. 25%
Find a Technical Advisor
Product Data Sheet Show all documents

Usage

  • For all roofline applications.
  • Adheres to problematic surfaces such as bitumen, asphalt, lead and galvanized steel.
  • Perimeter gap filling around window and door frames; ideal for timber frames where woodstaining is required.
  • For jointing all types of guttering.
  • Filling cracks in stone tiles/slates etc.
  • For all external weatherproofing applications.
  • For filling gaps between metal and composite roof and wall panels to form an effective lap joint bond.
  • For remedial weather proofing over all sealants, putties and mastics.
  • General industrial metal panel bonding and gap filling.
 

Advantages

  • Can be applied in all weathers.
  • Sticks to wet surfaces.
  • Resists all weather conditions.
  • Permanently flexible.
  • Can be used in conjunction with Bitumen and asphalt.
Shrinkage ca. 25%

Packaging

295ml cartridge

Colour

White, Translucent and Black

Product Details

Product Information

Shelf Life

Use within two years.

Storage Conditions

Store in cool (5 - 25°C) dry conditions with good ventilation and away from sources of ignition.

Density

0.9-1.0 g/cm³
Technical Information

Shore A Hardness

22

Service Temperature

-25°C to + 95°C

Joint Design

Joint Ratio - Maximum depth 50% of joint width

Minimum Joint Width - 5mm

Maximum Joint Width - 35mm

Application

Application Information

Ambient Air Temperature

+5°C to + 50°C

Curing Time

2mm per 24hours

Skin Time

15mins at 20°C
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean and dust free. All loose or flaking surface coatings should be removed before application. Glass, metal and aluminium should be cleaned with a solvent cleaner prior to application for optimum adhesion.

CLEANING OF TOOLS

For uncured product use Everbuild White Spirit, if cured this should be removed mechanically.

Documents