Product Data Sheet Show all documents
EVERBUILD® Smart Tack®

EVERBUILD® Smart Tack®

Advanced spray bonding system forming a web pattern on application

EVERBUILD® Smart Tack® is an advanced spray bonding system that outperforms and outdates conventional contact adhesives, providing significant performance and time saving application benefits. Based on new technology resins, EVERBUILD® Smart Tack® is applied by spray and provides very fine strands of “high solids” adhesive that forms a web type pattern on application.

  • Fast Tacking: -  Surfaces can normally be “closed” after only 3-5 minutes
  • Long Open Time: - Surfaces can also be left open for up to 2 hours.
  • Immediate Handling: - High early bond strength allows item to be handled, cut drilled and planed within 5 minutes of closing.
  • High temperature: - Unaffected by temperatures up to 90°C (194°F).
  • Fast Application; - 15 times quicker than applying conventional contact adhesive by spreader.
  • Cost effective: - Goes approximately three times further than applying conventional contact adhesive by spreader.
  • Convenient; - No airline, electric or press. Easy to maintain, no mess.
  • Safer: - Low odour, no CFC`s, self contained systems.
  • Blue Colour: - Unique to EVERBUILD® Smart Tack® range.
Solids 28-32% Viscosity Low
Find a Technical Advisor
Product Data Sheet Show all documents

Usage

  • Laminates
  • Veneers
  • Edge banding
  • Vinyl’s*
  • uPVC sheet#
  • Fabrics
  • Temporary/light duty bonding on carpets, fabrics, polystyrene/PU sheeting, posters etc.
 

Advantages

  • Fast Tacking: -  Surfaces can normally be “closed” after only 3-5 minutes
  • Long Open Time: - Surfaces can also be left open for up to 2 hours.
  • Immediate Handling: - High early bond strength allows item to be handled, cut drilled and planed within 5 minutes of closing.
  • High temperature: - Unaffected by temperatures up to 90°C (194°F).
  • Fast Application; - 15 times quicker than applying conventional contact adhesive by spreader.
  • Cost effective: - Goes approximately three times further than applying conventional contact adhesive by spreader.
  • Convenient; - No airline, electric or press. Easy to maintain, no mess.
  • Safer: - Low odour, no CFC`s, self contained systems.
  • Blue Colour: - Unique to EVERBUILD® Smart Tack® range.
Solids 28-32% Viscosity Low

Packaging

EVERBUILD® Smart Tack® Handy - 500ml Aerosol can

EVERBUILD® Smart Tack® Bulk Tank - 17kg Metal canister

Colour

Blue and Clear

Product Details

Product Information

Chemical Base

Synthetic rubber / resin

Shelf Life

12 months from date of manufacture in original unopened containers.

Storage Conditions

Store in original unopened containers between 5°C and 25°C. Store as flammable liquid.

Density

0.9 - 0.99 g/cm3

Application

Application Information

Tack Free Time

3 minutes - 2 hours
Consumption

Consumption

EVERBUILD® Smart Tack® Handy - 2.5-3.5m2

EVERBUILD® Smart Tack® Bulk Tank - 128m2
Application steps

APPLICATION INSTRUCTIONS

Always read SDS and wear protective clothing, gloves and eye/face protection before use.

SUBSTRATE PREPARATION

Surfaces to be bonded must be clean, dry and dust/grease free. When bonding plastic laminates/sheeting, it is recommended that substrates are conditioned for 48hrs before assembly at 20°C with a relative humidity of 45-55%. Air should be able to circulate freely around these components.

CLEANING OF TOOLS

Remove overspray with Stick 2 Contact Adhesive Thinner & Cleaner applied by cloth, checking compatibility with surface in a small inconspicuous area before full application.

EVERBUILD® Smart Tack® Handy

Remove skin from outer face of nozzle when left to stand for 15 mins or more.

EVERBUILD® Smart Tack® Bulk Tank

Gun and hose must be left attached to canister between jobs.  Remove skin from outer face of nozzle when left to stand for 15 mins or more. Clean blocked guns by dismantling and soaking metal parts in Stick 2 Contact Adhesive Thinner & Cleaner.

Documents