Sikafloor® MultiDur ET-14
Sikafloor® MultiDur ET-14 is a coloured rigid epoxy floor covering with textured properties.
- Light to medium mechanical resistance
- Medium chemical resistance
- Increased slip resistance
- Jointless
- Hygienic
- Total solid
- Gloss finish
- Easy cleanability
Usage
- for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
- for multi-storey and underground car parks, maintenance hangars and for wet process areas, e.g. beverage and food industry.
- for areas where slip resistance and easy cleanability is required
Advantages
- Light to medium mechanical resistance
- Medium chemical resistance
- Increased slip resistance
- Jointless
- Hygienic
- Total solid
- Gloss finish
- Easy cleanability
Packaging
Please refer to the individual Product Data Sheets
Colour
Almost unlimited choice of colour shades.
Appearance
Textured, gloss finish
System Details
APPROVALS / STANDARDS
- Cleanability “Excellent” (VDMA “Riboflavin test for low germ or sterile process technologies” tested).
- Slip resistance class R9 in accordance with DIN 51130 and BGR 181.
- Conforms to the requirements of EN 13813 and EN 1504-2
- Fire classification in accordance with EN 13501-1, Report-No. KB-Hoch-170419, Hoch Fladungen, Germany, March 2017
System Structure
Sikafloor® MultiDur ET-14
| 1. Primer | Sikafloor®-156/-161 |
| 2. Wearing Coat | 1–2 × Sikafloor®-264 Thixo |
Composition
Epoxy
Nominal Thickness
~1.0 mm
Shelf Life
Please refer to the individual Product Data Sheets
Storage Conditions
Please refer to the individual Product Data Sheets
Shore D Hardness
| ~76 (7 days / +23 °C) | (DIN 53 505) |
Compressive Strength
| Resin : ~60 N/mm2 (28 days / +23 °C) | (EN 196–1) |
Tensile Adhesion Strength
> 1.5 N/mm² (failure in concrete) | (ISO 4624) |
Reaction to Fire
| Bfl-S1 | (DIN EN 13501-1) |
Chemical Resistance
Resistant to many chemicals. Please ask for a detailed chemical resistance table.
Skid / Slip Resistance
R9 | (DIN 51130) |
Application
Product Temperature
Please refer to the individual Product Data Sheet
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
80 % r.h. max.
Dew Point
Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
When performing application work with Sikafloor® MultiDur ET-14, the substrate moisture content must not exceed 4 % pbw measured by Tramex.
Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method.
No rising moisture according to ASTM (Polyethylene-sheet).
Waiting Time / Overcoating
Before applying Sikafloor®–264 Thixo on Sikafloor®–156/–161 allow:
| Substrate temperature | Minimum | Maximum |
| +10 °C | 24 hours | 3 days |
| +20 °C | 12 hours | 2 days |
| +30 °C | 8 hours | 1 day |
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~ 72 hours | ~ 6 days | ~ 10 days |
| +20 °C | ~ 24 hours | ~ 4 days | ~ 7 days |
| +30 °C | ~ 18 hours | ~ 2 days | ~ 5 days |
Consumption
Sikafloor® MultiDur ET-14 system ( ~ 1,0 mm)
| Coating System | Product | Consumption |
| Primer | 1 × Sikafloor®-156/ -161 | ~0.3–0.5 kg/m² |
| Wearing coat | 1–2 × Sikafloor®-264 Thixo | ~0.5–0.8 kg/m² per layer |
CLEANING
Please refer to the Sikafloor®‐ Cleaning Regime