Sika Comfortfloor® Marble FX
Marble-effect, hard-wearing, self-smoothing polyurethane flooring system
Sika Comfortfloor® Marble FX is a marble-effect, elastic, self-smoothing, UV-resistant polyurethane flooring system. It provides a soft, comfortable, hard-wearing, seamless, low-maintenance floor. The System is part of the Sika Comfortfloor® decorative flooring range.
- Decorative designs using blends of pigments
- Comfortable to walk on
- Soft underfoot
- Low VOC emissions
- Low odour
- Good mechanical resistance
- Good resistance to abrasion
- Easy to apply
- Low maintenance
System Structure
Usage
Sika Comfortfloor® Marble FX is used in the following commercial and public buildings and areas:- Healthcare facilities and hospitals
- Schools and universities
- Shopping malls and museums
- Residential areas and homes
- The System may only be used by experienced professionals.
- The System may only be used for interior applications.
Advantages
- Decorative designs using blends of pigments
- Comfortable to walk on
- Soft underfoot
- Low VOC emissions
- Low odour
- Good mechanical resistance
- Good resistance to abrasion
- Easy to apply
- Low maintenance
Colour
Available in various colour shades
Appearance
Smooth, matt finish
System Details
ENVIRONMENTAL INFORMATION
French regulation on indoor VOC emissions class A+
Complies with the requirements of DIBt (October 2010) in combination with the NIK values from AgBB (February 2015) for use in the indoor environment.
Complies with the requirements of DIBt (June 2004) in combination with the NIK values from AgBB (March 2008) for use in the indoor environment.
APPROVALS / STANDARDS
-
Fire classification report EN 13501-1, GHENT, No. CR 22-0852-01
-
Indoor Air Comfort Gold EN 16516, eurofins, No. IACG-439-01-05-2022
System Structure
Sika Comfortfloor® Marble FX
| Layer | Product | |
| 1. | Primer | Sikafloor®-150 Sikafloor®-151 Sikafloor®-1590 Contact Sika Technical Service for information on choosing the right primer for your project. |
| 2. | Wearing layer | Sikafloor®-3000 FX |
| 3. | Seal coat or top coat | Sikafloor®-306 W (Optional) Sikafloor®-304 W Refer to the Product Data Sheet, approvals and certification. |
Composition
Polyurethane
Nominal thickness
2.0–3.0 mm
Shore A Hardness
Cured 14 days at +23 °C | 84 |
Resistance to wearing
Wearing group P | (EN 660-2) |
Resistance to moving furniture
No damage | (EN 424) |
Castor chair resistance
No damage (25 000 cycles) | (EN 425) |
Resistance to Impact
Class I | (EN ISO 6272-1) |
Indentation
0.02 mm | (EN 433) |
Tensile adhesion strength
> 1.5 N/mm² | (EN 1542) |
Crack Bridging Ability
Static | Class A2 (+20 °C) |
Elongation at break
Cured 14 days at +23 °C | 70 % |
Reaction to Fire
Class Bfl-s1 | (EN 13501-1) |
Resistance to stubbed cigarettes
Class 4 | (EN 1399) |
Chemical Resistance
Laboratory-defined resistance to many individual chemicals. Before proceeding, contact Sika Technical Service for specific information.
Sound Insulation
2 mm accoustic layer thickness | ΔLw=2 dB |
Application
Ambient Air Temperature
Maximum | +30 °C |
Minimum | +15 °C |
Relative Air Humidity
Maximum | 80 % r.h. |
Dew Point
Refer to the individual Product Data Sheet.
Substrate Temperature
Maximum | +30 °C |
Minimum | +15 °C |
Substrate Moisture Content
Refer to the individual Product Data Sheet.
Waiting Time / Overcoating
When using Sikafloor®-1590 refer to the individual Product Data Sheet for specific information on waiting time to overcoating.
Before applying Sikafloor®-3000 FX on the primer allow:
Temperature | Minimum | Maximum |
+10 °C | 17 hours | 4 days |
+20 °C | 9 hours | 2 days |
+30 °C | 7 hours | 1 day |
Before overcoating Sikafloor®-3000 FX allow:
Temperature | Minimum | Maximum |
+10 °C | 24 hours | 72 hours |
+20 °C | 16 hours | 48 hours |
+30 °C | 16 hours | 36 hours |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | 30 hours | 48 hours | 6 days |
| +20 °C | 16 hours | 24 hours | 4 days |
| +30 °C | 12 hours | 18 hours | 3 days |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Consumption
Layer | Product | Consumption |
Primer | Sikafloor®-150 Sikafloor®-151 Sikafloor®-1590 | 1-2 × 0.3–0.5 kg/m² |
Wearing layer | Sikafloor®-3000 FX | 2.8 kg/m² (2 mm) |
Seal coat or top coat | Sikafloor®-306 W Sikafloor®-304 W | 0.13 kg/m² per layer diluted 10 % with water |
Note: Consumption data is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level, wastage or any other variations. Apply the Product to a test area to calculate the exact consumption for the specific substrate conditions and proposed application equipment.