SikaWall®-571 One Coat Dash Receiver

12 months from date of manufacture

Dry frost free conditions

A1

3.8-4.4 L of water per 25 kg bag

When applied to a correctly prepared even substrate at a thickness of 15 mm (recommended thickness). A 25 kg bag covers approximately 1 m².

A 25 kg bag of SikaWall 571 One Coat Dash Receiver should be:

• Mixed with 3.8-4.4 litres of clean potable water, no other material should be added.
• Mixed by a concrete mixer or paddle mixer for hand application or mixed and applied through a render pump for machine application.
• Mix for approximately five minutes

• Apply one coat in two passes.  The first pass should applied at a thickness of 10-12mm depending on the final thickness required, the second pass should be applied at a thickness of 6-8mm depending on the final thickness required.
• To be used either as a dry dash receiver or to be used as a receiver for SikaWall-500 Wet Dash.
• Care should be taken not to over mix or over trowel as this will reduce the adhesion properties of the material
• Standard rendering practice should be followed in consideration of time of year and application times.