Product Data Sheet Show all documents
Sikagard®-6060 S

Sikagard®-6060 S

Sprayable bitumen based underbody coating in aerosol can

Sikagard®-6060 S is a fast-drying, bitumen-based quick repair protective coating in an aerosol can with very good rust-proofing and sound deadening properties. It is suitable for an effective vehicle underbody protection. Sikagard®-6060 S can be sprayed haze free without any cob webbing and does not drip.
Sikagard®-6060 S shows good adhesion on different paints, metal primers, metals and PVC without any pre-treatment.
A tough coating remains after drying, protecting metal from corrosion.  

  • Equipment independent (aerosol). Easy to use.
  • Outstanding application properties (no running or dripping)
  • Good adhesion performance to a wide variety of substrates
  • Excellent acoustic and damping properties
  • Fast drying
  • Road salt resistant
  • High solid content
 
Find a Technical Advisor
Product Data Sheet Show all documents

PRODUCT BENEFITS

  • Equipment independent (aerosol). Easy to use.
  • Outstanding application properties (no running or dripping)
  • Good adhesion performance to a wide variety of substrates
  • Excellent acoustic and damping properties
  • Fast drying
  • Road salt resistant
  • High solid content
 

Usage

Sikagard®-6060 S is a spray applied anti-corrosion coating for quick repairs of non-visible areas such as wheel arches and underbody parts of vehicles that do not need to be over painted.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.  

Packaging

Aerosol can

500 ml

 

Product Details

Typical Product Data
Chemical base

Bitumen solution

Colour (CQP001-1)

Black

Cure mechanism

Air-drying

Solid content

33 %

Application temperature

15 ─ 25 °C

Film thickness

wet

dry

400 µm

150 µm

Tack free time

75 minutes A

Drying time

2.5 h A

Service temperature

-25 ─ 80 °C

Shelf life

24 months B

CQP = Corporate Quality Procedure

A) 23 °C / 50 % r. h.

B) storage between 5 °C and 25 °C
Technical Information

CHEMICAL RESISTANCE

Sikagard®-6060 S is resistant against water, seawater, salt spray, bases and acids.

The above information is offered for general guidance only. Advice on specific applications will be given on request.

Application

Application Information

Surface Preparation

Surfaces must be clean, dry and free of rust, dust and grease. Bare metal substrates must be pre­treated to enhance corrosion resistance (e.g. uncoated steel, etc).

Application

Shake can approx. 40 times before use. Cover adjacent surfaces prior the spray process. Spray at room temperature and from a distance of approx. 25 cm in an grid motion to build up a continuous coat.

Sikagard®-6060 S can be applied without dripping. If a thick layer is required, let layers dry in between. Hold the can in an upright position and do not spray on parts of the brake, engine or exhaust system.

After use, invert can and spray in short bursts to clear nozzle.

 

Removal

Uncured Sikagard®-6060 S can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once dried, the material can only be removed mechanically. Hands and exposed skin shall be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water.

Do not use solvents on skin.

Overpainting

Sikagard®-6060 S cannot be overpainted.

Documents