Product Data Sheet Show all documents
SikaSeal®-632 Fire Putty+

SikaSeal®-632 Fire Putty+

Fire resistant putty

SikaSeal®-632 Fire Putty+ is a fire resistant sealing putty used for small openings around services in fire compartment walls and floors.

  • Up to 4 hours fire resistance.
  • Easy to apply, hand workable.
  • Cord is fitted to cover the gap around a service, no need to fill the gap.
  • Tested for a large variety of relevant wall and floor types.
Send us an enquiry
Product Data Sheet Show all documents

Usage

  • Restores the fire resistance performance of a wall or a floor which incorporates small service openings containing cables, insulated and uninsulated metal pipes.
  • Suitable for small gaps around services where sealants cannot be applied to the required depth. 
 

Advantages

  • Up to 4 hours fire resistance.
  • Easy to apply, hand workable.
  • Cord is fitted to cover the gap around a service, no need to fill the gap.
  • Tested for a large variety of relevant wall and floor types.

Packaging

5 pieces per box.

Colour

Red cords.

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • CE Marking and Declaration of Performance to European Technical Assessment ETA 21/1029, based on EAD 350454-00-1104:2017 - Fire stopping and fire sealing products, penetration seals.
  • Fire Resistance EN 13501-2, UL-EU, Certificate No.UL-EU-01218-CPR.
Product Information

Chemical Base

Silicone based putty.

Shelf Life

6 years from the date of production.

Storage Conditions

The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C.
Always refer to packaging.

Dimensions

SikaSeal®-632 Fire Putty+ cord dimension:

Length

~200 mm

Diameter

~15 mm
Technical Information

Resistance to fire

Refer to ‘Approvals / Certificates’ or contact Sika Technical Services for specific information.

Service Temperature

-20 °C min. / +70 °C max.

 

Application

Application steps

SUBSTRATE PREPARATION

The substrate must be clean, dry, sound, free from oils, grease, dust and loose or friable particles.

Documents