Reinforcement and Bonding Primers
Bonding Primers are used in specific cases to promote the bonding behaviour of repair materials to substrate. Sika provide products for small area and large-scale application with specific requirements.
Sika MonoTop®-610
Sika MonoTop -610 is a one component cementitious, polymer modified primer for reinforcement protection and also a bonding bridge for MonoTop concrete repair mortars.
Use
Sika MonoTop®-610 may be used to bond MonoTop concrete repair mortars to existing cementitious or steel substrates and provide additional corrosion protection to reinforcement in MonoTop concrete repair mortars especially in areas of low concrete cover and in the presence of chlorides.
Characteristics and Advantages
- Only requires mixing with water
- Active corrosion inhibitors for added protection
- Sprayable by wet spray method
- Adjustable consistency
- Suitable for drinking water contact
Colour
Light Grey (Powder)Packaging
25 kg & 10 kg bagsProduct Data Sheet
Sika® MonoTop® 610SikaTop® Armatec®-110 EpoCem®
SikaTop Armatec-110 EpoCem is a three component cement modified epoxy resin based anti-corrosive product containing corrosion inhibitors. It has been specifically formulated as a reinforcement coating and bonding primer for concrete repair mortars.
Use
- Suitable for control of anodic areas (Principle 11, method 11.1 of BS EN 1504-9)
- Suitable in concrete repair as corrosion protection for reinforcement.
- Suitable as a bonding primer on concrete and mortar
Characteristics and Advantages
- Contains EpoCem® technology - improved bonding agent
- Extended open times for repair mortars
- Compatible with most Sika® MonoTop® repair mortars
- Excellent adhesion to concrete and steel
- Contains corrosion inhibitor
- Certified for application under dynamic load conditions
- Good resistance to water and chloride penetration
- High shear strength
- Long pot life
- Easy to mix
- Can be brushed on or applied using spray gun
Colour
Cement Grey (Powder)
Component A (liquid)
Component B (hardener)
Component C (filler)
Packaging
Component A & B = 5 kg
Component C = 15 kg