201 Mortar Admix

Mortar Admix is an air entraining plasticiser that replaces lime in the mix to provide an easy to work “butter like” consistency to the mortar and to prevent shrinkage, cracking and crazing during the setting process. For use in brick laying and plastering mortars. Provides a degree of frost resistance and long term resistance to freeze-thaw cycles when set. Tested to BSEN934-Part 3.

DOWNLOADS

PDS | SDS

202 Integral Liquid Waterproofer

Integral Liquid Waterproofer is a liquid additive that provides long term water protection to mortar, concrete and rendering. Reduces water permeability and is suitable for all applications where resistance to water absorption is necessary such as pool and tank linings, roof areas, external rendering and pointing and structures below ground level. Tested to BSEN934-Part 3.

DOWNLOADS

PDS | SDS

203 Accelerator & Frostproofer

Accelerator & Frostproofer is a liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering to provide frost protection during the setting period. Effective even in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture.

DOWNLOADS

PDS | SDS

208 Powder Mortar Tone

Powder Mortar Tone is formulated from best quality oxide pigments for permanently colouring all types of mortars, rendering, concrete and pointing. The pigments disperse easily into the mix to give a uniform shade for each mix batch, shading can be adjusted to provide a wider variety of colour depths.

DOWNLOADS

PDS | SDS

Opti-Mix Mortar Plasticiser

Opti-Mix Mortar Plasticiser is the world’s first 1:25 plasticiser is just Pure Admix, smells and works like the best traditional Admix. Benefits include: superior plasticising action, controlled dosage, consistent mix design, easy to use, no waste. 1 litre is equivalent to 25 litres of standard product and 250ml is equivalent to 6.25 litres of standard product. Tested to BSEN934-Part 3.

DOWNLOADS

PDS | SDS

SikaMix Plus

A general purpose, economic liquid plasticiser and improver for brick and blockwork mortars. Reduces water demand – increases strength. Improves the frost resistance of hardened mortar while also reducing efflorescence.

DOWNLOADS

PDS | SDS

Sika Accelerator

Sika Accelerator is a cold weather and rapid hardening admixture for mortars screeds and renders.

DOWNLOADS

PDS | SDS

Sika Wintermix

A chloride free, winter working admixture for concrete that is suitable for use with steel reinforcement. Allows mortars and concretes to be used even at sub zero temperatures (refer to working practice of mortars in accordance with BS 5628-3).

DOWNLOADS

PDS | SDS

Sika Release

A ready to use formwork release agent suitable for mould and shutter faces prior to casting concrete in order to achieve a clean release after removal of formwork. The resultant concrete has a smooth uniform finish with reduced incidence of blow holes.

DOWNLOADS

PDS | SDS

SikaCim No Crack Concrete

Concrete reinforcing fibres and powder admixture for minimising cracking and enhancing the strength of concrete. Ideal for use on internal floor slabs, garages or shed bases, driveways and paths, underground  construction and imprinted concrete driveways. Use 1 sachet with 1 x 25kg bag of cement.

DOWNLOADS

PDS | SDS