Product Data Sheet Show all documents

EVERBUILD® ALL PURPOSE READY MIXED FILLER

Filler for Multiple Purposes

EVERBUILD® ALL PURPOSE READY MIXED FILLER is an easy-to-use ready-mixed filler which is suitable for both interior and exterior use. Dries to a smooth but tough crack-resistant, sandable finish which may be painted, papered or stained. The product is designed for indoor or outdoor repairs to plaster, plasterboard, brick, render, wood, stone and most other building materials.

  • Heavy-duty tough filler – interior or exterior use.
  • Ready-mixed formula – apply straight from tub or Easi-squeeze tube.
  • Overpaintable with most solvent-based and emulsion paints.
  • Overstainable 
  • Dries white.
Movement Accommodation Low – dries hard Maximum Fill 9mm in one coat - further layers may be built up Maximum Width 25mm pH8.5-9.9
Ask for a quote
Product Data Sheet Show all documents

Usage

Fills gaps and holes in:
  • Plaster
  • Brick
  • Stone
  • Wood
  • Render
 

Advantages

  • Heavy-duty tough filler – interior or exterior use.
  • Ready-mixed formula – apply straight from tub or Easi-squeeze tube.
  • Overpaintable with most solvent-based and emulsion paints.
  • Overstainable 
  • Dries white.
Movement Accommodation Low – dries hard Maximum Fill 9mm in one coat - further layers may be built up Maximum Width 25mm pH8.5-9.9

Packaging

600g & 1kg tubs, and 330g Easi-squeeze tubes.

Colour

White

Product Details

Product Information

Shelf Life

24 months from date of manufacture when stored according to manufacturers instructions.

Storage Conditions

Store at temperatures between 5°C - 25°C and protect from frost.

Density

S.G. at 20°C  ca. 1.8g / cm³

Application

Application Information

Ambient Air Temperature

5°C to 30°C.

Drying time

1-8 hours depending on depth and temperature

 
Application steps

APPLICATION

Tubs: Stir well and apply directly from the tub with spatula/spreader. Press the filler into the repair to a maximum depth of 9mm. For deeper cavities, apply in layers and allow each to dry (1 hour).

Easi-squeeze tubes: Remove cap and cut nozzle to required aperture. Squeeze directly into hole or crack and level with a filling knife. Note: do not exceed 5mm depth in one application. For greater depth, build up in individual layers.

Fill hole proud to allow for sanding and finish with a wet knife. Once dry, sand to a smooth finish. When used outdoors, seal repair with an oil based paint when fully dry.

CLEANING OF TOOLS

Clean tools immediately after use with warm water.

Documents