EVERBUILD 505 Plasterers GRIPCOAT®

An extra grip plaster bonding agent

EVERBUILD 505 Plasterers GRIPCOAT® contains a fine aggregate to provide an improved key before applying the plaster skim coat on many smooth and difficult surfaces. The fine aggregates are suspended in a unique gel to ensure easy application by roller or brush and an even spread of aggregate avoiding any weak spots in the key coat and preventing the aggregate particles coming loose during skimming. Can be used on many smooth and difficult surfaces such as glossy painted surfaces, textured paints, particle board, MDF, waterproof plasterboards, fire boards, pre-cast concrete and even ceramic tiles. One easily applied coat will allow overskimming onto surfaces that would otherwise need meshing, removing or keying. EVERBUILD 505 Plasterers GRIPCOAT® can also be used to provide a non-absorbent surface that reduces suction on blockwork and sand and cement screeds keeping the skim coat workable for longer. It can also be used to retard plaster skim coats on larger areas where you need to keep a wet edge.  

  • Extra grip plasterers bonding agent
  • Contains fine aggregate to improve plaster key
  • Reduces suction on blockwork and screeds
  • One coat application, plaster when dry
  • Blue colour to indicate coverage
                                                                                                                                                                                     Viscosity @ 23°C  15000-50000 cP pH 8.0-9.5 Minimum Film Forming Temperature (°C) Approx 5 High Temperature Stability (4 Weeks @ 50°C)Stable