Product Data Sheet Show all documents

Sarnafil® G 410-15 EL Felt

PVC adhered membrane for roof waterproofing

Sarnafil® G 410-15 EL Felt is a PVC, multi-layer, fully adhered, lacquered matt finish, weldable sheet membrane with a glass fibre reinforcing inlay and polyester fleece backing for roof waterproofing. Contains ultraviolet light stabilizers and flame retardants to provide a colour stable, fast installation, low maintenance and durable membrane. Thickness 1,5 mm.                                                                      

  • Proven performance over decades
  • Lacquer coated surface
  • Various colours available
  • Fast installation with Sarnacol® adhesives
  • Resistant to UV exposure
  • High dimensional stability due to glass fleece inlay.
  • High water vapour permeability.
  • Resistant to all common environmental influences
  • Felt backing compatible with old bitumen surfaces
  • Heat weldable
 
Find a Technical Advisor
Product Data Sheet Show all documents

Usage

This product may only be used by Sika® trained professionals.
  • Bonded, roof waterproofing membrane for exposed roofs

Advantages

  • Proven performance over decades
  • Lacquer coated surface
  • Various colours available
  • Fast installation with Sarnacol® adhesives
  • Resistant to UV exposure
  • High dimensional stability due to glass fleece inlay.
  • High water vapour permeability.
  • Resistant to all common environmental influences
  • Felt backing compatible with old bitumen surfaces
  • Heat weldable
 

Packaging

Standard rolls are wrapped individually in a blue PE-foil.

Roll size

Length

15,00 m

Width

2,00 m

Weight

66,00 kg

Colour

Surface

matt

Colours

Top surfacelight grey (nearest RAL 7047)
lead grey (nearest RAL 7012)
copper patina (Sika colour no. 6525)
copper brown (nearest RAL 8004)
traffic white (nearest RAL 9016)
 

Bottom surface

dark grey

Top surface colour available in other colours subject to minimum order quantities.

Product Details

Sustainability / Certifications / Approvals

ENVIRONMENTAL INFORMATION

  • Conformity with LEED v4 SSc 5 (Option 1): Heat Island Reduction - Roof (only traffic white (SR))
  • Conformity with LEED v4 MRc 2 (Option 1): Building Product Disclosure and Optimization – Environmental Product Declarations
  • Conformity with LEED v4 MRc 3 (Option 2): Building Product Disclosure and Optimization - Sourcing of Raw Materials
  • Conformity with LEED v4 MRc 4 (Option 2): Building Product Disclosure and Optimization - Material Ingredients
  • Conformity with LEED v2009 MRc 4 (Option 2): Recycled Content
  • BRE Environmental Product Declaration (EPD) available

APPROVALS / STANDARDS

  • CE Marking and Declaration of Performance to EN 13956 - Polymeric sheets for roof waterproofing.
  • External fire performance tested according to ENV 1187 and classified according to EN 13501-5: BROOF (t4).
 
Product Information

Product Declaration

EN 13956 - Polymeric sheets for roof waterproofing

Shelf Life

5 years from date of production

Storage Conditions

Product must be stored in original unopened and undamaged sealed packaging in dry conditions and temperatures between +5 °C and +30 °C. Store in a horizontal position. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage. Always refer to packaging.

Visible Defects

Pass

(EN 1850-2)

Length

15 m (-0 % / +5 %)

(EN 1848-2)

Width

2 m (-0,5 % / +1 %)

(EN 1848-2)

Effective Thickness

1,5 mm (-5 % / +10 %)

(EN 1849-2)

Straightness

≤  30 mm

(EN 1848-2)

Flatness

≤  10 mm

(EN 1848-2)

Mass per unit area

2,2 kg/m² (-5 % / +10 %)

(EN 1849-2)
System information

Compatibility

Not compatible in direct contact with plastics, e.g. EPS, XPS, or PF. Not resistant to tar, bitumen, oil and solvent containing materials.
Technical Information

Resistance to Impact

hard substrate

≥  700 mm

soft substrate

≥  1500 mm

Hail Resistance

rigid substrate

≥  22 m/s

flexible substrate

≥  30 m/s

Resistance to Static Load

soft substrate

≥ 20 kg

rigid substrate

≥ 20 kg

 

Tensile Strength

longitudinal (md)1)

≥  700 N/50 mm

transversal (cmd)2)

≥  700 N/50 mm


1) md = machine direction

2) cmd = cross machine direction

Elongation

longitudinal (md)1)

≥  65 %

transversal (cmd)2)

≥  65 %


1) md = machine direction

2) cmd = cross machine direction

Joint Peel Resistance

≥ 300 N/50 mm

(EN 12316-2)

Joint Shear Resistance

≥ 600 N/50 mm

(EN 12317-2)

Dimensional Stability

longitudinal (md)1)

≤ |0,2| %

transversal (cmd)2)

≤ |0,1| %

1) md = machine direction

2) cmd = cross machine direction

Solar Reflectance Index

Colour

Initial

3-years aged

Test Institute

RAL 9016

106

77

CRRC

Nr. 9525

55

-

Sika

Nr. 9500

4

-

Sika

CRRC tested products are listed in Cool Roof Rating Council (CRRC) product data base.

Foldability at Low Temperature

≤ -25 °C

(EN 495-5)

Water Tightness

Pass

(EN 1928)

Effect of Liquid Chemicals, Including Water

Contact Sika Technical Services for additional information

(EN 1847)

UV Exposure

Pass (> 5’000 h / grade 0)

(EN 1297)

External Fire Performance

BROOF (t4) 0° - 70° (subject to construction)

(EN 13501-5)

Reaction to Fire

Class E

(EN ISO 11925-2, classification to EN 13501-1)

Application

Application Information

Ambient Air Temperature

-20 °C min. / +60 °C max.

Substrate Temperature

-30 °C min. / +60 °C max.
Application steps

SUBSTRATE QUALITY

The substrate surface/supporting layer must be uniform, smooth and free of any sharp protrusion or burrs, clean, dry and free of grease, bitumen, oil and dust. All layers of the roof build-up and substrate must be secured against wind uplift. Metal sheets must be degreased with Sarna Cleaner before adhesive application.

SUBSTRATE PREPARATION

If dust exists on the surface, it must be completely removed before application of the product, preferably by vacuum extraction equipment.

Metal sheets must be degreased before adhesive application.

Documents